Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
LT-S8328XG-4XS24GT-S
The SmartByte LT-S8328XG-4XS24GT-S is the highly reliable Layer 2+ managed Ethernet switch with 24-port 10/100/1000Base-T RJ45 and 4-port 1G/2.5G/10GBase-X SFP. The LT-S8328XG-4XS24GT-S provides comprehensive end to end QoS as well as flexible and rich management, security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks based on cost effective price. It supports G.8032 ERPS, MSTP/RSTP/STP redundancy technologies, IPv4/IPv6 static routing, DHCP server and robust Layer 2 management and secure function, which all making the LT-S8328XG-4XS24GT-S performs effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.
➢ 4*1G/2.5G/10G SFP+ slots uplink, 24 *10/100/1000BASE-T ports downlink, 1*RJ45 console interface for switch basic management and setup.
➢ Hardware: Marvell AC5 series 1.2GHz CPU, Marvell AC5 series switch chipsets, 512MB RAM and 512MB flash
➢ Layer 3 features: IPv4/IPv6 static routing, DHCPv4/ DHCPv6 client, DHCPv4 relay, DHCP relay.
➢ Port features: Supports port aggregation, IEEE802.3x flow control, port isolation, port mirroring, loop detection and
broadcast storm suppression
➢ VLAN: Supports IEEE802.1Q tagged VLAN, mac based VLAN, IP based VLAN, protocol based VLAN, voice VLAN and
private VLAN.
➢ QinQ: Supports port-based, VLAN-based and flow-based QinQ
➢ Supports GVRP/LLDP/SPAN/RSPAN/DHCPv4 snooping
➢ Layer 2 ring network protocol: Supports STP, RSTP, MSTP, G.8032 ERPS protocol, single ring, sub ring
➢ Multicast: IGMP snooping, IGMP v1, v2, v3, PIM-SM
➢ QoS: QoS class, remarking, Supports SP, WRR queue scheduling, Ingress/Egress port-based rate-limit
and policy-based QoS
➢ Security: Supports ACL, 802.1x，port-security, IP source guard, ARP-check, DAI, anti-gateway ARP spoofing,
Ddos attack protection, telnet/SSH/HTTP/HTTPS user access control and AAA.
➢ Reliability: Loop detect based on port or VLAN, the Ethernet in the first mile 802.3ah
➢ Management: Supports IPv4/IPv6 dual stack management, system log management, user management,
login service management, firmware management, web management, CLI management, fault detection, DNS,
NTP, sFlow, SNMP, MQTT, RMON and dual partition management.
➢ Application protocol: Supports telnet server, telnet client, SCP, SFTP, SSH server, TACACS and TFTP client
Model No. | LT-S8328XG-4XS24GT-S | ||
Interface | Fiber ports | Copper RJ45 ports | |
4 | 24 | ||
Ethernet | 24*10/100/1000Base-T RJ45 4*1G/2.5G/10GBase-X SFP+ | ||
CPU | Marvell AC5 series 1.2GHz | ||
Size of RAM | 512MB | ||
Size of Flash | 512MB | ||
Switch chip model | Marvell AC5 series | ||
Management port | 1*RJ45 Console port (115200,8,N,1) | ||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3ae 10Gigabit Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | ||
LED Indicators | |||
PWR (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | |
SYS (System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-24 (Copper ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
1-24 (Port speed indicator) Yellow | Off: Port speed on 10/100M | ||
On: Port speed on 1000M | |||
25-28 (Fiber ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | VAC input Rated voltage range：100-240V Frequency：50/60Hz | ||
Total power consumption | Full loading ≤ 24W | ||
Over-current protection | Support | ||
Layer 2 switching | |||
Port aggregation | Support GE port aggregation | ||
Support 2.5GE aggregation | |||
Support 10GE aggregation | |||
Support static aggregation | |||
Support LACP dynamic aggregation | |||
Up to 64 aggregation groups and up to 8 ports per group | |||
Port features | Support IEEE802.3x flow control | ||
Support interface counters | |||
Support port isolation | |||
Port mirroring (One-to-One, Many-to-One) | |||
Support loop detection (Port-based; VLAN-based) | |||
Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast) | |||
VLAN | IEEE802.1Q tagged VLAN | ||
Mac based VLAN | |||
IP based VLAN | |||
Protocol based VLAN | |||
Voice VLAN, specially divide VLAN for user voice data flow | |||
Private VLAN, divide a VLAN broadcast domain into multiple subdomains to form a double-layer VLAN structure | |||
VLAN range: 1-4094 | |||
Support access mode/trunk mode/hybrid mode | |||
Mac-address table management | Support static Mac-address management | ||
Support dynamic Mac-address Management | |||
Support filtering Mac-address | |||
Support MAC limit based on port and VLAN | |||
Support MAC flapping based on port and VLAN | |||
16K Mac-address table size | |||
GVRP | Normal mode | ||
Fixed mode | |||
Forbidden mode | |||
QinQ | Port-based QinQ | ||
VLAN-based QinQ | |||
VLAN mapping | |||
Flow-based QinQ | |||
LLDP | Link Layer Discovery Protocol | ||
Med | |||
SPAN | Number of Sessions: 7 | ||
Many-to-one | |||
RSPAN | Remote Switch Port Analyzer | ||
MSTP | 802.1D STP | ||
802.1W RSTP | |||
802.1S MSTP | |||
BPDU Guard | |||
Number of Single Ring Device Connections: 20 | |||
ERPS G.8032 | Major ring | ||
Sub ring | |||
Recovery time ≤20ms | |||
Number of Single Ring Device Connections: No limit | |||
QoS | QoS Class, Remarking | ||
Support SP, WRR Queue Scheduling | |||
Ingress Port-based Rate-limit | |||
Egress Port-based Rate-limit | |||
Egress port-queue shaper | |||
Policy-based QoS | |||
Port Queue Numbers: 8 | |||
DHCPv4 Snooping | DHCP snooping trust port | ||
DHCP snooping option-82 | |||
DHCP snooping circuit-id and remote-id customized | |||
L2 Multicast | |||
IGMP | IGMP v1, v2, v3 | ||
IGMP Snooping | Internet Group Management Protocol Snooping | ||
Fast Leave | |||
Multicast Table Size: 1K | |||
PIM-SM | Protocol Independent Multicast-Sparse Mode | ||
Security features | |||
ACL | IP Standard ACL IP Extended ACL MAC extend ACL IPv6 ACL Time Range ACL apply on VLAN ACL entries, include input and output | ||
802.1x | Port access control Mac-address access control RADIUS server | ||
Port-security | Port-security | ||
IP source guard | IP Source Guard, Port-based IP/Mac Binding Access | ||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | ||
DAI | Dynamic ARP Inspection | ||
Anti-gateway ARP Spoofing | Prevent Gateway ARP Spoofing | ||
Ddos | Ddos attack protection | ||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | ||
AAA | RADIUS authentication access switch | ||
TACACS authentication access switch | |||
Authorization | |||
Reliability | |||
Loop Detect | Loop detect, based on port or VLAN | ||
EFM | The Ethernet in the first mile, 802.3ah | ||
Management & Maintenance functions | |||
Dual Stack | IPv4 and IPv6 Dual Stack Management | ||
System Log Management | Syslog Level 7 to 0 Corresponding Debug/Info/Notice/Warning/ Err/ Critical/ Alert | ||
Support connecting up to 3 Servers | |||
For IPv4 and IPv6 | |||
User Management | Support password protection, support MD5/SHA256/SHA512 algorithm | ||
Local Management of User Privilege | |||
Remote authorization by RADIUS or TARCAS | |||
Enable privilege protection | |||
User password complexity requirements | |||
User login fail protection | |||
User Privilege Level 0 to 15 | |||
Login Service Management | Up to 8 users online simultaneously | ||
Access control based on IPv4 or IPv6 ACL | |||
Firmware Management | Firmware upgraded by WEB | ||
Firmware upgraded by CLI | |||
Dual partition | |||
Web Management | Web Management | ||
Support HTTP V1.1 | |||
Support HTTPS | |||
For IPv4 and IPv6 | |||
CLI management | Console/Telnet command line management | ||
Fault Detection | Ping/Traceroute, For IPv4 and IPv6 | ||
Optical transceiver DDM | |||
One click fault information collection | |||
Cable detection | |||
DNS | Domain Name System | ||
NTP | Network Time Protocol, For IPv4 and IPv6 | ||
Support domain name configuration | |||
Configuration Import /Export | FTP/TFTP based remote configuration import and export | ||
sFlow | Sampled flow | ||
SNMP | Version SNMPV2C/V3 | ||
MQTT | Message Queuing Telemetry Transport | ||
RMON | Support RMON (Remote Monitoring) alarm | ||
Dual partition management | Support dual partition switching | ||
Application Protocol Functions | |||
Telnet server | Support telnet server for IPv4 and IPv6 | ||
Telnet client | Support telnet client for IPv4 and IPv6 | ||
SCP (Secure Copy Protocol) | SCP client/server for IPv4 and IPv6 | ||
SFTP | sftp client/server for IPv4 and IPv6 | ||
SSH server | Support login based on user password-SSH2, support IPv4, IPv6 | ||
Support public key-based login | |||
TACACS | Support TACACS (the terminal access controller accesses the control system) | ||
TFTP | Support TFTP Client | ||
Layer 3 features | |||
Static Route | Support VLAN interface and route port | ||
IPv4 static routing table entry configuration | |||
ARP dynamic learning and static configuration | |||
IPv6 static routing table entry configuration | |||
Neighbor discovery and static configuration | |||
Routing prefix table size 1k for IPv4 | |||
DHCPv4 Client | Dynamic host configuration protocol for IPv4 | ||
DHCPv6 Client | Dynamic host configuration protocol for IPv6 | ||
DHCPv4 Relay | DHCP Relay for IPv4 | ||
DHCPv4 Server | DHCP Server for IPv4 | ||
Switching features | |||
Switching capacity | 128Gbps | ||
Packet forwarding rate | 190Mpps | ||
MAC address table | 16K | ||
VLAN | 4K | ||
Buffer | 12Mbit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDI/MDIX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Installation method | Desktop; Rack-mount | ||
Dimension(W*D*H) mm | 440*180*45mm | ||
Weight | 2.77kg | ||
Operating environment | |||
Operating temperature | 0℃~ +50℃ | ||
Storage/transportation temperature | -10℃~ +70℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Protection | Surge protection of power: 4KV | ||
Surge protection of Ethernet ports: 4KV | |||
ESD: Contact 6kV, Air 8kV | |||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | ＞100,000 hours | ||
Warranty | 3 years | ||
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
LT-S8328XG-4XS24GT-S
The SmartByte LT-S8328XG-4XS24GT-S is the highly reliable Layer 2+ managed Ethernet switch with 24-port 10/100/1000Base-T RJ45 and 4-port 1G/2.5G/10GBase-X SFP. The LT-S8328XG-4XS24GT-S provides comprehensive end to end QoS as well as flexible and rich management, security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks based on cost effective price. It supports G.8032 ERPS, MSTP/RSTP/STP redundancy technologies, IPv4/IPv6 static routing, DHCP server and robust Layer 2 management and secure function, which all making the LT-S8328XG-4XS24GT-S performs effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.
➢ 4*1G/2.5G/10G SFP+ slots uplink, 24 *10/100/1000BASE-T ports downlink, 1*RJ45 console interface for switch basic management and setup.
➢ Hardware: Marvell AC5 series 1.2GHz CPU, Marvell AC5 series switch chipsets, 512MB RAM and 512MB flash
➢ Layer 3 features: IPv4/IPv6 static routing, DHCPv4/ DHCPv6 client, DHCPv4 relay, DHCP relay.
➢ Port features: Supports port aggregation, IEEE802.3x flow control, port isolation, port mirroring, loop detection and
broadcast storm suppression
➢ VLAN: Supports IEEE802.1Q tagged VLAN, mac based VLAN, IP based VLAN, protocol based VLAN, voice VLAN and
private VLAN.
➢ QinQ: Supports port-based, VLAN-based and flow-based QinQ
➢ Supports GVRP/LLDP/SPAN/RSPAN/DHCPv4 snooping
➢ Layer 2 ring network protocol: Supports STP, RSTP, MSTP, G.8032 ERPS protocol, single ring, sub ring
➢ Multicast: IGMP snooping, IGMP v1, v2, v3, PIM-SM
➢ QoS: QoS class, remarking, Supports SP, WRR queue scheduling, Ingress/Egress port-based rate-limit
and policy-based QoS
➢ Security: Supports ACL, 802.1x，port-security, IP source guard, ARP-check, DAI, anti-gateway ARP spoofing,
Ddos attack protection, telnet/SSH/HTTP/HTTPS user access control and AAA.
➢ Reliability: Loop detect based on port or VLAN, the Ethernet in the first mile 802.3ah
➢ Management: Supports IPv4/IPv6 dual stack management, system log management, user management,
login service management, firmware management, web management, CLI management, fault detection, DNS,
NTP, sFlow, SNMP, MQTT, RMON and dual partition management.
➢ Application protocol: Supports telnet server, telnet client, SCP, SFTP, SSH server, TACACS and TFTP client
Model No. | LT-S8328XG-4XS24GT-S | ||
Interface | Fiber ports | Copper RJ45 ports | |
4 | 24 | ||
Ethernet | 24*10/100/1000Base-T RJ45 4*1G/2.5G/10GBase-X SFP+ | ||
CPU | Marvell AC5 series 1.2GHz | ||
Size of RAM | 512MB | ||
Size of Flash | 512MB | ||
Switch chip model | Marvell AC5 series | ||
Management port | 1*RJ45 Console port (115200,8,N,1) | ||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3ae 10Gigabit Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | ||
LED Indicators | |||
PWR (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | |
SYS (System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-24 (Copper ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
1-24 (Port speed indicator) Yellow | Off: Port speed on 10/100M | ||
On: Port speed on 1000M | |||
25-28 (Fiber ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | VAC input Rated voltage range：100-240V Frequency：50/60Hz | ||
Total power consumption | Full loading ≤ 24W | ||
Over-current protection | Support | ||
Layer 2 switching | |||
Port aggregation | Support GE port aggregation | ||
Support 2.5GE aggregation | |||
Support 10GE aggregation | |||
Support static aggregation | |||
Support LACP dynamic aggregation | |||
Up to 64 aggregation groups and up to 8 ports per group | |||
Port features | Support IEEE802.3x flow control | ||
Support interface counters | |||
Support port isolation | |||
Port mirroring (One-to-One, Many-to-One) | |||
Support loop detection (Port-based; VLAN-based) | |||
Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast) | |||
VLAN | IEEE802.1Q tagged VLAN | ||
Mac based VLAN | |||
IP based VLAN | |||
Protocol based VLAN | |||
Voice VLAN, specially divide VLAN for user voice data flow | |||
Private VLAN, divide a VLAN broadcast domain into multiple subdomains to form a double-layer VLAN structure | |||
VLAN range: 1-4094 | |||
Support access mode/trunk mode/hybrid mode | |||
Mac-address table management | Support static Mac-address management | ||
Support dynamic Mac-address Management | |||
Support filtering Mac-address | |||
Support MAC limit based on port and VLAN | |||
Support MAC flapping based on port and VLAN | |||
16K Mac-address table size | |||
GVRP | Normal mode | ||
Fixed mode | |||
Forbidden mode | |||
QinQ | Port-based QinQ | ||
VLAN-based QinQ | |||
VLAN mapping | |||
Flow-based QinQ | |||
LLDP | Link Layer Discovery Protocol | ||
Med | |||
SPAN | Number of Sessions: 7 | ||
Many-to-one | |||
RSPAN | Remote Switch Port Analyzer | ||
MSTP | 802.1D STP | ||
802.1W RSTP | |||
802.1S MSTP | |||
BPDU Guard | |||
Number of Single Ring Device Connections: 20 | |||
ERPS G.8032 | Major ring | ||
Sub ring | |||
Recovery time ≤20ms | |||
Number of Single Ring Device Connections: No limit | |||
QoS | QoS Class, Remarking | ||
Support SP, WRR Queue Scheduling | |||
Ingress Port-based Rate-limit | |||
Egress Port-based Rate-limit | |||
Egress port-queue shaper | |||
Policy-based QoS | |||
Port Queue Numbers: 8 | |||
DHCPv4 Snooping | DHCP snooping trust port | ||
DHCP snooping option-82 | |||
DHCP snooping circuit-id and remote-id customized | |||
L2 Multicast | |||
IGMP | IGMP v1, v2, v3 | ||
IGMP Snooping | Internet Group Management Protocol Snooping | ||
Fast Leave | |||
Multicast Table Size: 1K | |||
PIM-SM | Protocol Independent Multicast-Sparse Mode | ||
Security features | |||
ACL | IP Standard ACL IP Extended ACL MAC extend ACL IPv6 ACL Time Range ACL apply on VLAN ACL entries, include input and output | ||
802.1x | Port access control Mac-address access control RADIUS server | ||
Port-security | Port-security | ||
IP source guard | IP Source Guard, Port-based IP/Mac Binding Access | ||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | ||
DAI | Dynamic ARP Inspection | ||
Anti-gateway ARP Spoofing | Prevent Gateway ARP Spoofing | ||
Ddos | Ddos attack protection | ||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | ||
AAA | RADIUS authentication access switch | ||
TACACS authentication access switch | |||
Authorization | |||
Reliability | |||
Loop Detect | Loop detect, based on port or VLAN | ||
EFM | The Ethernet in the first mile, 802.3ah | ||
Management & Maintenance functions | |||
Dual Stack | IPv4 and IPv6 Dual Stack Management | ||
System Log Management | Syslog Level 7 to 0 Corresponding Debug/Info/Notice/Warning/ Err/ Critical/ Alert | ||
Support connecting up to 3 Servers | |||
For IPv4 and IPv6 | |||
User Management | Support password protection, support MD5/SHA256/SHA512 algorithm | ||
Local Management of User Privilege | |||
Remote authorization by RADIUS or TARCAS | |||
Enable privilege protection | |||
User password complexity requirements | |||
User login fail protection | |||
User Privilege Level 0 to 15 | |||
Login Service Management | Up to 8 users online simultaneously | ||
Access control based on IPv4 or IPv6 ACL | |||
Firmware Management | Firmware upgraded by WEB | ||
Firmware upgraded by CLI | |||
Dual partition | |||
Web Management | Web Management | ||
Support HTTP V1.1 | |||
Support HTTPS | |||
For IPv4 and IPv6 | |||
CLI management | Console/Telnet command line management | ||
Fault Detection | Ping/Traceroute, For IPv4 and IPv6 | ||
Optical transceiver DDM | |||
One click fault information collection | |||
Cable detection | |||
DNS | Domain Name System | ||
NTP | Network Time Protocol, For IPv4 and IPv6 | ||
Support domain name configuration | |||
Configuration Import /Export | FTP/TFTP based remote configuration import and export | ||
sFlow | Sampled flow | ||
SNMP | Version SNMPV2C/V3 | ||
MQTT | Message Queuing Telemetry Transport | ||
RMON | Support RMON (Remote Monitoring) alarm | ||
Dual partition management | Support dual partition switching | ||
Application Protocol Functions | |||
Telnet server | Support telnet server for IPv4 and IPv6 | ||
Telnet client | Support telnet client for IPv4 and IPv6 | ||
SCP (Secure Copy Protocol) | SCP client/server for IPv4 and IPv6 | ||
SFTP | sftp client/server for IPv4 and IPv6 | ||
SSH server | Support login based on user password-SSH2, support IPv4, IPv6 | ||
Support public key-based login | |||
TACACS | Support TACACS (the terminal access controller accesses the control system) | ||
TFTP | Support TFTP Client | ||
Layer 3 features | |||
Static Route | Support VLAN interface and route port | ||
IPv4 static routing table entry configuration | |||
ARP dynamic learning and static configuration | |||
IPv6 static routing table entry configuration | |||
Neighbor discovery and static configuration | |||
Routing prefix table size 1k for IPv4 | |||
DHCPv4 Client | Dynamic host configuration protocol for IPv4 | ||
DHCPv6 Client | Dynamic host configuration protocol for IPv6 | ||
DHCPv4 Relay | DHCP Relay for IPv4 | ||
DHCPv4 Server | DHCP Server for IPv4 | ||
Switching features | |||
Switching capacity | 128Gbps | ||
Packet forwarding rate | 190Mpps | ||
MAC address table | 16K | ||
VLAN | 4K | ||
Buffer | 12Mbit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDI/MDIX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Installation method | Desktop; Rack-mount | ||
Dimension(W*D*H) mm | 440*180*45mm | ||
Weight | 2.77kg | ||
Operating environment | |||
Operating temperature | 0℃~ +50℃ | ||
Storage/transportation temperature | -10℃~ +70℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Protection | Surge protection of power: 4KV | ||
Surge protection of Ethernet ports: 4KV | |||
ESD: Contact 6kV, Air 8kV | |||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | ＞100,000 hours | ||
Warranty | 3 years | ||
Copy product links
Long by picture save/share
LT-S8328XG-4XS24GT-S
The SmartByte LT-S8328XG-4XS24GT-S is the highly reliable Layer 2+ managed Ethernet switch with 24-port 10/100/1000Base-T RJ45 and 4-port 1G/2.5G/10GBase-X SFP. The LT-S8328XG-4XS24GT-S provides comprehensive end to end QoS as well as flexible and rich management, security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks based on cost effective price. It supports G.8032 ERPS, MSTP/RSTP/STP redundancy technologies, IPv4/IPv6 static routing, DHCP server and robust Layer 2 management and secure function, which all making the LT-S8328XG-4XS24GT-S performs effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.
➢ 4*1G/2.5G/10G SFP+ slots uplink, 24 *10/100/1000BASE-T ports downlink, 1*RJ45 console interface for switch basic management and setup.
➢ Hardware: Marvell AC5 series 1.2GHz CPU, Marvell AC5 series switch chipsets, 512MB RAM and 512MB flash
➢ Layer 3 features: IPv4/IPv6 static routing, DHCPv4/ DHCPv6 client, DHCPv4 relay, DHCP relay.
➢ Port features: Supports port aggregation, IEEE802.3x flow control, port isolation, port mirroring, loop detection and
broadcast storm suppression
➢ VLAN: Supports IEEE802.1Q tagged VLAN, mac based VLAN, IP based VLAN, protocol based VLAN, voice VLAN and
private VLAN.
➢ QinQ: Supports port-based, VLAN-based and flow-based QinQ
➢ Supports GVRP/LLDP/SPAN/RSPAN/DHCPv4 snooping
➢ Layer 2 ring network protocol: Supports STP, RSTP, MSTP, G.8032 ERPS protocol, single ring, sub ring
➢ Multicast: IGMP snooping, IGMP v1, v2, v3, PIM-SM
➢ QoS: QoS class, remarking, Supports SP, WRR queue scheduling, Ingress/Egress port-based rate-limit
and policy-based QoS
➢ Security: Supports ACL, 802.1x，port-security, IP source guard, ARP-check, DAI, anti-gateway ARP spoofing,
Ddos attack protection, telnet/SSH/HTTP/HTTPS user access control and AAA.
➢ Reliability: Loop detect based on port or VLAN, the Ethernet in the first mile 802.3ah
➢ Management: Supports IPv4/IPv6 dual stack management, system log management, user management,
login service management, firmware management, web management, CLI management, fault detection, DNS,
NTP, sFlow, SNMP, MQTT, RMON and dual partition management.
➢ Application protocol: Supports telnet server, telnet client, SCP, SFTP, SSH server, TACACS and TFTP client
Model No. | LT-S8328XG-4XS24GT-S | ||
Interface | Fiber ports | Copper RJ45 ports | |
4 | 24 | ||
Ethernet | 24*10/100/1000Base-T RJ45 4*1G/2.5G/10GBase-X SFP+ | ||
CPU | Marvell AC5 series 1.2GHz | ||
Size of RAM | 512MB | ||
Size of Flash | 512MB | ||
Switch chip model | Marvell AC5 series | ||
Management port | 1*RJ45 Console port (115200,8,N,1) | ||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3ae 10Gigabit Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | ||
LED Indicators | |||
PWR (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | |
SYS (System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-24 (Copper ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
1-24 (Port speed indicator) Yellow | Off: Port speed on 10/100M | ||
On: Port speed on 1000M | |||
25-28 (Fiber ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | VAC input Rated voltage range：100-240V Frequency：50/60Hz | ||
Total power consumption | Full loading ≤ 24W | ||
Over-current protection | Support | ||
Layer 2 switching | |||
Port aggregation | Support GE port aggregation | ||
Support 2.5GE aggregation | |||
Support 10GE aggregation | |||
Support static aggregation | |||
Support LACP dynamic aggregation | |||
Up to 64 aggregation groups and up to 8 ports per group | |||
Port features | Support IEEE802.3x flow control | ||
Support interface counters | |||
Support port isolation | |||
Port mirroring (One-to-One, Many-to-One) | |||
Support loop detection (Port-based; VLAN-based) | |||
Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast) | |||
VLAN | IEEE802.1Q tagged VLAN | ||
Mac based VLAN | |||
IP based VLAN | |||
Protocol based VLAN | |||
Voice VLAN, specially divide VLAN for user voice data flow | |||
Private VLAN, divide a VLAN broadcast domain into multiple subdomains to form a double-layer VLAN structure | |||
VLAN range: 1-4094 | |||
Support access mode/trunk mode/hybrid mode | |||
Mac-address table management | Support static Mac-address management | ||
Support dynamic Mac-address Management | |||
Support filtering Mac-address | |||
Support MAC limit based on port and VLAN | |||
Support MAC flapping based on port and VLAN | |||
16K Mac-address table size | |||
GVRP | Normal mode | ||
Fixed mode | |||
Forbidden mode | |||
QinQ | Port-based QinQ | ||
VLAN-based QinQ | |||
VLAN mapping | |||
Flow-based QinQ | |||
LLDP | Link Layer Discovery Protocol | ||
Med | |||
SPAN | Number of Sessions: 7 | ||
Many-to-one | |||
RSPAN | Remote Switch Port Analyzer | ||
MSTP | 802.1D STP | ||
802.1W RSTP | |||
802.1S MSTP | |||
BPDU Guard | |||
Number of Single Ring Device Connections: 20 | |||
ERPS G.8032 | Major ring | ||
Sub ring | |||
Recovery time ≤20ms | |||
Number of Single Ring Device Connections: No limit | |||
QoS | QoS Class, Remarking | ||
Support SP, WRR Queue Scheduling | |||
Ingress Port-based Rate-limit | |||
Egress Port-based Rate-limit | |||
Egress port-queue shaper | |||
Policy-based QoS | |||
Port Queue Numbers: 8 | |||
DHCPv4 Snooping | DHCP snooping trust port | ||
DHCP snooping option-82 | |||
DHCP snooping circuit-id and remote-id customized | |||
L2 Multicast | |||
IGMP | IGMP v1, v2, v3 | ||
IGMP Snooping | Internet Group Management Protocol Snooping | ||
Fast Leave | |||
Multicast Table Size: 1K | |||
PIM-SM | Protocol Independent Multicast-Sparse Mode | ||
Security features | |||
ACL | IP Standard ACL IP Extended ACL MAC extend ACL IPv6 ACL Time Range ACL apply on VLAN ACL entries, include input and output | ||
802.1x | Port access control Mac-address access control RADIUS server | ||
Port-security | Port-security | ||
IP source guard | IP Source Guard, Port-based IP/Mac Binding Access | ||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | ||
DAI | Dynamic ARP Inspection | ||
Anti-gateway ARP Spoofing | Prevent Gateway ARP Spoofing | ||
Ddos | Ddos attack protection | ||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | ||
AAA | RADIUS authentication access switch | ||
TACACS authentication access switch | |||
Authorization | |||
Reliability | |||
Loop Detect | Loop detect, based on port or VLAN | ||
EFM | The Ethernet in the first mile, 802.3ah | ||
Management & Maintenance functions | |||
Dual Stack | IPv4 and IPv6 Dual Stack Management | ||
System Log Management | Syslog Level 7 to 0 Corresponding Debug/Info/Notice/Warning/ Err/ Critical/ Alert | ||
Support connecting up to 3 Servers | |||
For IPv4 and IPv6 | |||
User Management | Support password protection, support MD5/SHA256/SHA512 algorithm | ||
Local Management of User Privilege | |||
Remote authorization by RADIUS or TARCAS | |||
Enable privilege protection | |||
User password complexity requirements | |||
User login fail protection | |||
User Privilege Level 0 to 15 | |||
Login Service Management | Up to 8 users online simultaneously | ||
Access control based on IPv4 or IPv6 ACL | |||
Firmware Management | Firmware upgraded by WEB | ||
Firmware upgraded by CLI | |||
Dual partition | |||
Web Management | Web Management | ||
Support HTTP V1.1 | |||
Support HTTPS | |||
For IPv4 and IPv6 | |||
CLI management | Console/Telnet command line management | ||
Fault Detection | Ping/Traceroute, For IPv4 and IPv6 | ||
Optical transceiver DDM | |||
One click fault information collection | |||
Cable detection | |||
DNS | Domain Name System | ||
NTP | Network Time Protocol, For IPv4 and IPv6 | ||
Support domain name configuration | |||
Configuration Import /Export | FTP/TFTP based remote configuration import and export | ||
sFlow | Sampled flow | ||
SNMP | Version SNMPV2C/V3 | ||
MQTT | Message Queuing Telemetry Transport | ||
RMON | Support RMON (Remote Monitoring) alarm | ||
Dual partition management | Support dual partition switching | ||
Application Protocol Functions | |||
Telnet server | Support telnet server for IPv4 and IPv6 | ||
Telnet client | Support telnet client for IPv4 and IPv6 | ||
SCP (Secure Copy Protocol) | SCP client/server for IPv4 and IPv6 | ||
SFTP | sftp client/server for IPv4 and IPv6 | ||
SSH server | Support login based on user password-SSH2, support IPv4, IPv6 | ||
Support public key-based login | |||
TACACS | Support TACACS (the terminal access controller accesses the control system) | ||
TFTP | Support TFTP Client | ||
Layer 3 features | |||
Static Route | Support VLAN interface and route port | ||
IPv4 static routing table entry configuration | |||
ARP dynamic learning and static configuration | |||
IPv6 static routing table entry configuration | |||
Neighbor discovery and static configuration | |||
Routing prefix table size 1k for IPv4 | |||
DHCPv4 Client | Dynamic host configuration protocol for IPv4 | ||
DHCPv6 Client | Dynamic host configuration protocol for IPv6 | ||
DHCPv4 Relay | DHCP Relay for IPv4 | ||
DHCPv4 Server | DHCP Server for IPv4 | ||
Switching features | |||
Switching capacity | 128Gbps | ||
Packet forwarding rate | 190Mpps | ||
MAC address table | 16K | ||
VLAN | 4K | ||
Buffer | 12Mbit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDI/MDIX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Installation method | Desktop; Rack-mount | ||
Dimension(W*D*H) mm | 440*180*45mm | ||
Weight | 2.77kg | ||
Operating environment | |||
Operating temperature | 0℃~ +50℃ | ||
Storage/transportation temperature | -10℃~ +70℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Protection | Surge protection of power: 4KV | ||
Surge protection of Ethernet ports: 4KV | |||
ESD: Contact 6kV, Air 8kV | |||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | ＞100,000 hours | ||
Warranty | 3 years | ||
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
Landline
+86-755-28687362
Whatsapp/Teams/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
Managed Industrial Ethernet Switch
Managed Industrial PoE Switch
Managed Industrial PoE++ Switch
Managed Industrial Boost PoE Switch
Managed Industrial Fiber Bypass Switch
Unmanaged Industrial Ethernet Switch
Unmanaged Industrial PoE/PoE++ Switch
Industrial Media Converter
Industrial PoE Media Converter
Industrial Boost Power Supply
Landline
+86-755-28687362
Whatsapp/Skype/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
SmartByte Manufacturing Facility
Add：7-8th floor, 1st building, Lihe Youke Innovation Base, Zhenlong town, Huiyang district, Huizhou city
SmartByte R & D Center
Add: 2nd building, Huajian Edifice, Technology East Road, Haixi Technology Park, Fuzhou City
Copyright © 2026 SMARTBYTE. All Rights Reserved
