Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
LT-S8528XGP-4XS24GT-4BT Series
SmartByte LT-S8528XGP-4XS24GT-4BT series are the Layer 3 Managed PoE Switch that provides high-density performance, Layer 3 static and dynamic routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). They deliver full Gigabit access and unparalleled scalability to 10G performance. The LT-S8528XGP-4XS24GT-4BT series provide comprehensive end to end QoS as well as flexible and rich management, security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks based on cost effective price. The powerful network security features also make the LT-S8528XGP-4XS24GT-4BT series perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications. Complying with IEEE 802.3af/at/bt full PoE standards, they deliver a maximum 740W PoE budget. Ports 1–4 support 90W PoE++ for high-power IoT terminals, while the remaining ports support standard PoE/PoE+. Built-in PoE scheduling, watchdog and over-current protection guarantee intelligent and safe power supply, which can be widely deployed in HD surveillance, high-density Wi-Fi 6 networking, smart building automation, and enterprise unified communication systems
➢ 4*1G/2.5G/10G SFP+ slots uplink, 24*10/100/1000BASE-T PoE ports downlink, 1*RJ45 console interface for switch basic management and setup.
➢ Complies with IEEE 802.3at, IEEE802.3af and IEEE802.3bt standard. 1-4 ports support PoE++ 90W per port.Max PoE output budget 740W
➢ Hardware: Marvell AC5 series 1.2GHz CPU, Marvell AC5 series switch chipsets, 1GB RAM and 512MB flash
➢ Layer 3 features: IPv4/IPv6 static routing, DHCPv4/ DHCPv6 client, DHCPv4 relay, DHCP relay; Supports ECMP, VRRP, RIP, OSPF, BGP4, IS-IS; 13K routing entries
➢ Port features: Supports port aggregation, IEEE802.3x flow control, port isolation, port mirroring, loop detection and
broadcast storm suppression
➢ VLAN: Supports IEEE802.1Q tagged VLAN, mac based VLAN, IP based VLAN, protocol based VLAN, voice VLAN and
private VLAN.
➢ QinQ: Supports port-based, VLAN-based and flow-based QinQ
➢ Supports GVRP/LLDP/SPAN/RSPAN/DHCPv4 snooping
➢ Layer 2 ring network protocol: Supports STP, RSTP, MSTP, G.8032 ERPS protocol, single ring, sub ring
➢ Multicast: IGMP snooping, IGMP v1, v2, v3, PIM-SM
➢ QoS: QoS class, remarking, Supports SP, WRR queue scheduling, Ingress/Egress port-based rate-limit
and policy-based QoS
➢ Security: Supports ACL, 802.1x，port-security, IP source guard, ARP-check, DAI, anti-gateway ARP spoofing,
Ddos attack protection, telnet/SSH/HTTP/HTTPS user access control and AAA.
➢ Reliability: Loop detect based on port or VLAN, the Ethernet in the first mile 802.3ah
➢ Management: Supports IPv4/IPv6 dual stack management, system log management, user management,
login service management, firmware management, web management, CLI management, fault detection, DNS,
NTP, sFlow, SNMP, MQTT, RMON and dual partition management.
➢ Application protocol: Supports telnet server, telnet client, SCP, SFTP, SSH server, TACACS and TFTP client
Model No. | LT-S8528XGP-4XS24GT-4BT | ||
Interface | Fiber ports | Copper RJ45 ports | |
4 | 24 | ||
Ethernet | 24*10/100/1000Base-T RJ45 PoE 4*1G/2.5G/10GBase-X SFP+ | ||
CPU | Marvell AC5 series 1.2GHz | ||
Size of RAM | 1GB | ||
Size of Flash | 512MB | ||
Switch chip model | Marvell AC5 series | ||
Management port | 1*RJ45 Console port (115200,8,N,1) | ||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3ae 10Gigabit Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE 802.3af PoE IEEE 802.3at PoE+ IEEE 802.3bt PoE++ | ||
LED Indicators | |||
PWR (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | |
SYS (System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-24 (Copper ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
1-24 (PoE status indicator) Yellow | Off: PoE not working | ||
On: PoE working | |||
25-28 (Fiber ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | 1* AC 100-240V input on default 2* AC 100-240V input optional | ||
Total power consumption | Full loading ≤850W | ||
PoE budget | PoE output budget Max 740W; 1-4 ports support PoE++ 90W, 5-24 ports support PoE 15.4W and PoE+ 30W | ||
Over-current protection | Support | ||
Layer 2 switching | |||
Port aggregation | Support GE port aggregation | ||
Support 2.5GE aggregation | |||
Support 10GE aggregation | |||
Support static aggregation | |||
Support LACP dynamic aggregation | |||
Up to 64 aggregation groups and up to 8 ports per group | |||
Port features | Support IEEE802.3x flow control | ||
Support interface counters | |||
Support port isolation | |||
Port mirroring (One-to-One, Many-to-One) | |||
Support loop detection (Port-based; VLAN-based) | |||
Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast) | |||
VLAN | IEEE802.1Q tagged VLAN | ||
Mac based VLAN | |||
IP based VLAN | |||
Protocol based VLAN | |||
Voice VLAN, specially divide VLAN for user voice data flow | |||
Private VLAN, divide a VLAN broadcast domain into multiple subdomains to form a double-layer VLAN structure | |||
VLAN range: 1-4094 | |||
Support access mode/trunk mode/hybrid mode | |||
Mac-address table management | Support static Mac-address management | ||
Support dynamic Mac-address Management | |||
Support filtering Mac-address | |||
Support MAC limit based on port and VLAN | |||
Support MAC flapping based on port and VLAN | |||
16K Mac-address table size | |||
GVRP | Normal mode | ||
Fixed mode | |||
Forbidden mode | |||
QinQ | Port-based QinQ | ||
VLAN-based QinQ | |||
VLAN mapping | |||
Flow-based QinQ | |||
LLDP | Link Layer Discovery Protocol | ||
Med | |||
SPAN | Number of Sessions: 7 | ||
Many-to-one | |||
RSPAN | Remote Switch Port Analyzer | ||
MSTP | 802.1D STP | ||
802.1W RSTP | |||
802.1S MSTP | |||
BPDU Guard | |||
Number of Single Ring Device Connections: 20 | |||
ERPS G.8032 | Major ring | ||
Sub ring | |||
Recovery time ≤20ms | |||
Number of Single Ring Device Connections: No limit | |||
QoS | QoS Class, Remarking | ||
Support SP, WRR Queue Scheduling | |||
Ingress Port-based Rate-limit | |||
Egress Port-based Rate-limit | |||
Egress port-queue shaper | |||
Policy-based QoS | |||
Port Queue Numbers: 8 | |||
DHCPv4 Snooping | DHCP snooping trust port | ||
DHCP snooping option-82 | |||
DHCP snooping circuit-id and remote-id customized | |||
L2 Multicast | |||
IGMP | IGMP v1, v2, v3 | ||
IGMP Snooping | Internet Group Management Protocol Snooping | ||
Fast Leave | |||
Multicast Table Size: 1K | |||
PIM-SM | Protocol Independent Multicast-Sparse Mode | ||
Security features | |||
ACL | IP Standard ACL IP Extended ACL MAC extend ACL IPv6 ACL Time Range ACL apply on VLAN ACL entries, include input and output | ||
802.1x | Port access control Mac-address access control RADIUS server | ||
Port-security | Port-security | ||
IP source guard | IP Source Guard, Port-based IP/Mac Binding Access | ||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | ||
DAI | Dynamic ARP Inspection | ||
Anti-gateway ARP Spoofing | Prevent Gateway ARP Spoofing | ||
Ddos | Ddos attack protection | ||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | ||
AAA | RADIUS authentication access switch | ||
TACACS authentication access switch | |||
Authorization | |||
Reliability | |||
Loop Detect | Loop detect, based on port or VLAN | ||
EFM | The Ethernet in the first mile, 802.3ah | ||
Management & Maintenance functions | |||
Dual Stack | IPv4 and IPv6 Dual Stack Management | ||
System Log Management | Syslog Level 7 to 0 Corresponding Debug/Info/Notice/Warning/ Err/ Critical/ Alert | ||
Support connecting up to 3 Servers | |||
For IPv4 and IPv6 | |||
User Management | Support password protection, support MD5/SHA256/SHA512 algorithm | ||
Local Management of User Privilege | |||
Remote authorization by RADIUS or TACACS | |||
Enable privilege protection | |||
User password complexity requirements | |||
User login fail protection | |||
User Privilege Level 0 to 15 | |||
Login Service Management | Up to 8 users online simultaneously | ||
Access control based on IPv4 or IPv6 ACL | |||
Firmware Management | Firmware upgraded by WEB | ||
Firmware upgraded by CLI | |||
Dual partition | |||
Web Management | Web Management | ||
Support HTTP V1.1 | |||
Support HTTPS | |||
For IPv4 and IPv6 | |||
CLI management | Console/Telnet command line management | ||
Fault Detection | Ping/Traceroute, For IPv4 and IPv6 | ||
Dying gasp optional | |||
Optical transceiver DDM | |||
One click fault information collection | |||
Cable detection | |||
DNS | Domain Name System | ||
NTP | Network Time Protocol, For IPv4 and IPv6 | ||
Support domain name configuration | |||
Configuration Import /Export | FTP/TFTP based remote configuration import and export | ||
sFlow | Sampled flow | ||
SNMP | Version SNMPV2C/V3 | ||
MQTT | Message Queuing Telemetry Transport | ||
RMON | Support RMON (Remote Monitoring) alarm | ||
PoE management | Support 802.3af/802.3at | ||
Support PD watchdog | |||
Support PoE priority management | |||
Support Max PoE power configuration for each port | |||
Support alarm threshold configuration | |||
Support reserved power configuration | |||
Support PoE schedule | |||
Support POE legacy mode | |||
Dual partition management | Support dual partition switching | ||
Application Protocol Functions | |||
Telnet server | Support telnet server for IPv4 and IPv6 | ||
Telnet client | Support telnet client for IPv4 and IPv6 | ||
SCP (Secure Copy Protocol) | SCP client/server for IPv4 and IPv6 | ||
SFTP | sftp client/server for IPv4 and IPv6 | ||
SSH server | Support login based on user password-SSH2, support IPv4, IPv6 | ||
Support public key-based login | |||
TACACS | Support TACACS (the terminal access controller accesses the control system) | ||
TFTP | Support TFTP Client | ||
Layer 3 features | |||
Static Route | Support VLAN interface and route port | ||
IPv4 static routing table entry configuration | |||
ARP dynamic learning and static configuration | |||
IPv6 static routing table entry configuration | |||
Neighbor discovery and static configuration | |||
Routing prefix table size 4k for IPv4, for IPv6 divide by 4 | |||
DHCPv4 Client | Dynamic host configuration protocol for IPv4 | ||
DHCPv6 Client | Dynamic host configuration protocol for IPv6 | ||
DHCPv4 Relay | DHCP Relay for IPv4 | ||
DHCPv4 Server | DHCP Server for IPv4 | ||
ECMP | Support ECMP (Equal-cost multi-path routing) | ||
Support the configuration of ECMP Max next-hop | |||
Support capacity balanced configuration | |||
Route policy | IPv4 prefix-list | ||
VRRP | Virtual Router Redundancy Protocol | ||
Routing Protocol Specification | |||
RIP | RIPv1/v2 | ||
OSPFv2 | OSPFv2 | ||
BGP4 | BGP4 | ||
BGP Support Routing Recursive ECMP | |||
Support to view the number of neighbors and up/down state | |||
IS-IS | IS-ISv4 | ||
Routing entries | 13K | ||
Switching features | |||
Switching capacity | 128Gbps | ||
Packet forwarding rate | 190.4Mpps | ||
MAC address table | 16K | ||
VLAN | 4K | ||
Buffer | 12Mbit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDX/MIDX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Installation method | Desktop; Rack-mount | ||
Dimension(W*D*H) mm | 440*245*44mm | ||
Weight | 4.2 kg | ||
Operating environment | |||
Operating temperature | 0℃~ +50℃ | ||
Storage/transportation temperature | -10℃~ +70℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Protection | Surge protection of power: 6KV | ||
Surge protection of Ethernet ports: 4KV | |||
ESD: Contact 6kV, Air 8kV | |||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | ＞100,000 hours | ||
Warranty | 3 years | ||
Description | |
LT-S8528XGP-4XS24GT-4BT-AC850 | Layer 3 managed PoE++ switch with 4*1G/2.5G/10G SFP+ ports and 24*10/100/1000M RJ45 PoE ports，1-4 ports support PoE++ 90W; AC 100-240V 50/60Hz input, Max PoE output budget 740W |
LT-S8528XGP-4XS24GT-4BT-2AC850 | Layer 3 managed PoE++ switch with 4*1G/2.5G/10G SFP+ ports and 24*10/100/1000M RJ45 PoE ports，1-4 ports support PoE++ 90W; Redundant AC 100-240V 50/60Hz input, Max PoE output budget 740W |
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
LT-S8528XGP-4XS24GT-4BT Series
SmartByte LT-S8528XGP-4XS24GT-4BT series are the Layer 3 Managed PoE Switch that provides high-density performance, Layer 3 static and dynamic routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). They deliver full Gigabit access and unparalleled scalability to 10G performance. The LT-S8528XGP-4XS24GT-4BT series provide comprehensive end to end QoS as well as flexible and rich management, security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks based on cost effective price. The powerful network security features also make the LT-S8528XGP-4XS24GT-4BT series perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications. Complying with IEEE 802.3af/at/bt full PoE standards, they deliver a maximum 740W PoE budget. Ports 1–4 support 90W PoE++ for high-power IoT terminals, while the remaining ports support standard PoE/PoE+. Built-in PoE scheduling, watchdog and over-current protection guarantee intelligent and safe power supply, which can be widely deployed in HD surveillance, high-density Wi-Fi 6 networking, smart building automation, and enterprise unified communication systems
➢ 4*1G/2.5G/10G SFP+ slots uplink, 24*10/100/1000BASE-T PoE ports downlink, 1*RJ45 console interface for switch basic management and setup.
➢ Complies with IEEE 802.3at, IEEE802.3af and IEEE802.3bt standard. 1-4 ports support PoE++ 90W per port.Max PoE output budget 740W
➢ Hardware: Marvell AC5 series 1.2GHz CPU, Marvell AC5 series switch chipsets, 1GB RAM and 512MB flash
➢ Layer 3 features: IPv4/IPv6 static routing, DHCPv4/ DHCPv6 client, DHCPv4 relay, DHCP relay; Supports ECMP, VRRP, RIP, OSPF, BGP4, IS-IS; 13K routing entries
➢ Port features: Supports port aggregation, IEEE802.3x flow control, port isolation, port mirroring, loop detection and
broadcast storm suppression
➢ VLAN: Supports IEEE802.1Q tagged VLAN, mac based VLAN, IP based VLAN, protocol based VLAN, voice VLAN and
private VLAN.
➢ QinQ: Supports port-based, VLAN-based and flow-based QinQ
➢ Supports GVRP/LLDP/SPAN/RSPAN/DHCPv4 snooping
➢ Layer 2 ring network protocol: Supports STP, RSTP, MSTP, G.8032 ERPS protocol, single ring, sub ring
➢ Multicast: IGMP snooping, IGMP v1, v2, v3, PIM-SM
➢ QoS: QoS class, remarking, Supports SP, WRR queue scheduling, Ingress/Egress port-based rate-limit
and policy-based QoS
➢ Security: Supports ACL, 802.1x，port-security, IP source guard, ARP-check, DAI, anti-gateway ARP spoofing,
Ddos attack protection, telnet/SSH/HTTP/HTTPS user access control and AAA.
➢ Reliability: Loop detect based on port or VLAN, the Ethernet in the first mile 802.3ah
➢ Management: Supports IPv4/IPv6 dual stack management, system log management, user management,
login service management, firmware management, web management, CLI management, fault detection, DNS,
NTP, sFlow, SNMP, MQTT, RMON and dual partition management.
➢ Application protocol: Supports telnet server, telnet client, SCP, SFTP, SSH server, TACACS and TFTP client
Model No. | LT-S8528XGP-4XS24GT-4BT | ||
Interface | Fiber ports | Copper RJ45 ports | |
4 | 24 | ||
Ethernet | 24*10/100/1000Base-T RJ45 PoE 4*1G/2.5G/10GBase-X SFP+ | ||
CPU | Marvell AC5 series 1.2GHz | ||
Size of RAM | 1GB | ||
Size of Flash | 512MB | ||
Switch chip model | Marvell AC5 series | ||
Management port | 1*RJ45 Console port (115200,8,N,1) | ||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3ae 10Gigabit Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE 802.3af PoE IEEE 802.3at PoE+ IEEE 802.3bt PoE++ | ||
LED Indicators | |||
PWR (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | |
SYS (System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-24 (Copper ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
1-24 (PoE status indicator) Yellow | Off: PoE not working | ||
On: PoE working | |||
25-28 (Fiber ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | 1* AC 100-240V input on default 2* AC 100-240V input optional | ||
Total power consumption | Full loading ≤850W | ||
PoE budget | PoE output budget Max 740W; 1-4 ports support PoE++ 90W, 5-24 ports support PoE 15.4W and PoE+ 30W | ||
Over-current protection | Support | ||
Layer 2 switching | |||
Port aggregation | Support GE port aggregation | ||
Support 2.5GE aggregation | |||
Support 10GE aggregation | |||
Support static aggregation | |||
Support LACP dynamic aggregation | |||
Up to 64 aggregation groups and up to 8 ports per group | |||
Port features | Support IEEE802.3x flow control | ||
Support interface counters | |||
Support port isolation | |||
Port mirroring (One-to-One, Many-to-One) | |||
Support loop detection (Port-based; VLAN-based) | |||
Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast) | |||
VLAN | IEEE802.1Q tagged VLAN | ||
Mac based VLAN | |||
IP based VLAN | |||
Protocol based VLAN | |||
Voice VLAN, specially divide VLAN for user voice data flow | |||
Private VLAN, divide a VLAN broadcast domain into multiple subdomains to form a double-layer VLAN structure | |||
VLAN range: 1-4094 | |||
Support access mode/trunk mode/hybrid mode | |||
Mac-address table management | Support static Mac-address management | ||
Support dynamic Mac-address Management | |||
Support filtering Mac-address | |||
Support MAC limit based on port and VLAN | |||
Support MAC flapping based on port and VLAN | |||
16K Mac-address table size | |||
GVRP | Normal mode | ||
Fixed mode | |||
Forbidden mode | |||
QinQ | Port-based QinQ | ||
VLAN-based QinQ | |||
VLAN mapping | |||
Flow-based QinQ | |||
LLDP | Link Layer Discovery Protocol | ||
Med | |||
SPAN | Number of Sessions: 7 | ||
Many-to-one | |||
RSPAN | Remote Switch Port Analyzer | ||
MSTP | 802.1D STP | ||
802.1W RSTP | |||
802.1S MSTP | |||
BPDU Guard | |||
Number of Single Ring Device Connections: 20 | |||
ERPS G.8032 | Major ring | ||
Sub ring | |||
Recovery time ≤20ms | |||
Number of Single Ring Device Connections: No limit | |||
QoS | QoS Class, Remarking | ||
Support SP, WRR Queue Scheduling | |||
Ingress Port-based Rate-limit | |||
Egress Port-based Rate-limit | |||
Egress port-queue shaper | |||
Policy-based QoS | |||
Port Queue Numbers: 8 | |||
DHCPv4 Snooping | DHCP snooping trust port | ||
DHCP snooping option-82 | |||
DHCP snooping circuit-id and remote-id customized | |||
L2 Multicast | |||
IGMP | IGMP v1, v2, v3 | ||
IGMP Snooping | Internet Group Management Protocol Snooping | ||
Fast Leave | |||
Multicast Table Size: 1K | |||
PIM-SM | Protocol Independent Multicast-Sparse Mode | ||
Security features | |||
ACL | IP Standard ACL IP Extended ACL MAC extend ACL IPv6 ACL Time Range ACL apply on VLAN ACL entries, include input and output | ||
802.1x | Port access control Mac-address access control RADIUS server | ||
Port-security | Port-security | ||
IP source guard | IP Source Guard, Port-based IP/Mac Binding Access | ||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | ||
DAI | Dynamic ARP Inspection | ||
Anti-gateway ARP Spoofing | Prevent Gateway ARP Spoofing | ||
Ddos | Ddos attack protection | ||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | ||
AAA | RADIUS authentication access switch | ||
TACACS authentication access switch | |||
Authorization | |||
Reliability | |||
Loop Detect | Loop detect, based on port or VLAN | ||
EFM | The Ethernet in the first mile, 802.3ah | ||
Management & Maintenance functions | |||
Dual Stack | IPv4 and IPv6 Dual Stack Management | ||
System Log Management | Syslog Level 7 to 0 Corresponding Debug/Info/Notice/Warning/ Err/ Critical/ Alert | ||
Support connecting up to 3 Servers | |||
For IPv4 and IPv6 | |||
User Management | Support password protection, support MD5/SHA256/SHA512 algorithm | ||
Local Management of User Privilege | |||
Remote authorization by RADIUS or TACACS | |||
Enable privilege protection | |||
User password complexity requirements | |||
User login fail protection | |||
User Privilege Level 0 to 15 | |||
Login Service Management | Up to 8 users online simultaneously | ||
Access control based on IPv4 or IPv6 ACL | |||
Firmware Management | Firmware upgraded by WEB | ||
Firmware upgraded by CLI | |||
Dual partition | |||
Web Management | Web Management | ||
Support HTTP V1.1 | |||
Support HTTPS | |||
For IPv4 and IPv6 | |||
CLI management | Console/Telnet command line management | ||
Fault Detection | Ping/Traceroute, For IPv4 and IPv6 | ||
Dying gasp optional | |||
Optical transceiver DDM | |||
One click fault information collection | |||
Cable detection | |||
DNS | Domain Name System | ||
NTP | Network Time Protocol, For IPv4 and IPv6 | ||
Support domain name configuration | |||
Configuration Import /Export | FTP/TFTP based remote configuration import and export | ||
sFlow | Sampled flow | ||
SNMP | Version SNMPV2C/V3 | ||
MQTT | Message Queuing Telemetry Transport | ||
RMON | Support RMON (Remote Monitoring) alarm | ||
PoE management | Support 802.3af/802.3at | ||
Support PD watchdog | |||
Support PoE priority management | |||
Support Max PoE power configuration for each port | |||
Support alarm threshold configuration | |||
Support reserved power configuration | |||
Support PoE schedule | |||
Support POE legacy mode | |||
Dual partition management | Support dual partition switching | ||
Application Protocol Functions | |||
Telnet server | Support telnet server for IPv4 and IPv6 | ||
Telnet client | Support telnet client for IPv4 and IPv6 | ||
SCP (Secure Copy Protocol) | SCP client/server for IPv4 and IPv6 | ||
SFTP | sftp client/server for IPv4 and IPv6 | ||
SSH server | Support login based on user password-SSH2, support IPv4, IPv6 | ||
Support public key-based login | |||
TACACS | Support TACACS (the terminal access controller accesses the control system) | ||
TFTP | Support TFTP Client | ||
Layer 3 features | |||
Static Route | Support VLAN interface and route port | ||
IPv4 static routing table entry configuration | |||
ARP dynamic learning and static configuration | |||
IPv6 static routing table entry configuration | |||
Neighbor discovery and static configuration | |||
Routing prefix table size 4k for IPv4, for IPv6 divide by 4 | |||
DHCPv4 Client | Dynamic host configuration protocol for IPv4 | ||
DHCPv6 Client | Dynamic host configuration protocol for IPv6 | ||
DHCPv4 Relay | DHCP Relay for IPv4 | ||
DHCPv4 Server | DHCP Server for IPv4 | ||
ECMP | Support ECMP (Equal-cost multi-path routing) | ||
Support the configuration of ECMP Max next-hop | |||
Support capacity balanced configuration | |||
Route policy | IPv4 prefix-list | ||
VRRP | Virtual Router Redundancy Protocol | ||
Routing Protocol Specification | |||
RIP | RIPv1/v2 | ||
OSPFv2 | OSPFv2 | ||
BGP4 | BGP4 | ||
BGP Support Routing Recursive ECMP | |||
Support to view the number of neighbors and up/down state | |||
IS-IS | IS-ISv4 | ||
Routing entries | 13K | ||
Switching features | |||
Switching capacity | 128Gbps | ||
Packet forwarding rate | 190.4Mpps | ||
MAC address table | 16K | ||
VLAN | 4K | ||
Buffer | 12Mbit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDX/MIDX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Installation method | Desktop; Rack-mount | ||
Dimension(W*D*H) mm | 440*245*44mm | ||
Weight | 4.2 kg | ||
Operating environment | |||
Operating temperature | 0℃~ +50℃ | ||
Storage/transportation temperature | -10℃~ +70℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Protection | Surge protection of power: 6KV | ||
Surge protection of Ethernet ports: 4KV | |||
ESD: Contact 6kV, Air 8kV | |||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | ＞100,000 hours | ||
Warranty | 3 years | ||
Description | |
LT-S8528XGP-4XS24GT-4BT-AC850 | Layer 3 managed PoE++ switch with 4*1G/2.5G/10G SFP+ ports and 24*10/100/1000M RJ45 PoE ports，1-4 ports support PoE++ 90W; AC 100-240V 50/60Hz input, Max PoE output budget 740W |
LT-S8528XGP-4XS24GT-4BT-2AC850 | Layer 3 managed PoE++ switch with 4*1G/2.5G/10G SFP+ ports and 24*10/100/1000M RJ45 PoE ports，1-4 ports support PoE++ 90W; Redundant AC 100-240V 50/60Hz input, Max PoE output budget 740W |
Copy product links
Long by picture save/share
LT-S8528XGP-4XS24GT-4BT Series
SmartByte LT-S8528XGP-4XS24GT-4BT series are the Layer 3 Managed PoE Switch that provides high-density performance, Layer 3 static and dynamic routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). They deliver full Gigabit access and unparalleled scalability to 10G performance. The LT-S8528XGP-4XS24GT-4BT series provide comprehensive end to end QoS as well as flexible and rich management, security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks based on cost effective price. The powerful network security features also make the LT-S8528XGP-4XS24GT-4BT series perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications. Complying with IEEE 802.3af/at/bt full PoE standards, they deliver a maximum 740W PoE budget. Ports 1–4 support 90W PoE++ for high-power IoT terminals, while the remaining ports support standard PoE/PoE+. Built-in PoE scheduling, watchdog and over-current protection guarantee intelligent and safe power supply, which can be widely deployed in HD surveillance, high-density Wi-Fi 6 networking, smart building automation, and enterprise unified communication systems
➢ 4*1G/2.5G/10G SFP+ slots uplink, 24*10/100/1000BASE-T PoE ports downlink, 1*RJ45 console interface for switch basic management and setup.
➢ Complies with IEEE 802.3at, IEEE802.3af and IEEE802.3bt standard. 1-4 ports support PoE++ 90W per port.Max PoE output budget 740W
➢ Hardware: Marvell AC5 series 1.2GHz CPU, Marvell AC5 series switch chipsets, 1GB RAM and 512MB flash
➢ Layer 3 features: IPv4/IPv6 static routing, DHCPv4/ DHCPv6 client, DHCPv4 relay, DHCP relay; Supports ECMP, VRRP, RIP, OSPF, BGP4, IS-IS; 13K routing entries
➢ Port features: Supports port aggregation, IEEE802.3x flow control, port isolation, port mirroring, loop detection and
broadcast storm suppression
➢ VLAN: Supports IEEE802.1Q tagged VLAN, mac based VLAN, IP based VLAN, protocol based VLAN, voice VLAN and
private VLAN.
➢ QinQ: Supports port-based, VLAN-based and flow-based QinQ
➢ Supports GVRP/LLDP/SPAN/RSPAN/DHCPv4 snooping
➢ Layer 2 ring network protocol: Supports STP, RSTP, MSTP, G.8032 ERPS protocol, single ring, sub ring
➢ Multicast: IGMP snooping, IGMP v1, v2, v3, PIM-SM
➢ QoS: QoS class, remarking, Supports SP, WRR queue scheduling, Ingress/Egress port-based rate-limit
and policy-based QoS
➢ Security: Supports ACL, 802.1x，port-security, IP source guard, ARP-check, DAI, anti-gateway ARP spoofing,
Ddos attack protection, telnet/SSH/HTTP/HTTPS user access control and AAA.
➢ Reliability: Loop detect based on port or VLAN, the Ethernet in the first mile 802.3ah
➢ Management: Supports IPv4/IPv6 dual stack management, system log management, user management,
login service management, firmware management, web management, CLI management, fault detection, DNS,
NTP, sFlow, SNMP, MQTT, RMON and dual partition management.
➢ Application protocol: Supports telnet server, telnet client, SCP, SFTP, SSH server, TACACS and TFTP client
Model No. | LT-S8528XGP-4XS24GT-4BT | ||
Interface | Fiber ports | Copper RJ45 ports | |
4 | 24 | ||
Ethernet | 24*10/100/1000Base-T RJ45 PoE 4*1G/2.5G/10GBase-X SFP+ | ||
CPU | Marvell AC5 series 1.2GHz | ||
Size of RAM | 1GB | ||
Size of Flash | 512MB | ||
Switch chip model | Marvell AC5 series | ||
Management port | 1*RJ45 Console port (115200,8,N,1) | ||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3ae 10Gigabit Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE 802.3af PoE IEEE 802.3at PoE+ IEEE 802.3bt PoE++ | ||
LED Indicators | |||
PWR (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | |
SYS (System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-24 (Copper ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
1-24 (PoE status indicator) Yellow | Off: PoE not working | ||
On: PoE working | |||
25-28 (Fiber ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | 1* AC 100-240V input on default 2* AC 100-240V input optional | ||
Total power consumption | Full loading ≤850W | ||
PoE budget | PoE output budget Max 740W; 1-4 ports support PoE++ 90W, 5-24 ports support PoE 15.4W and PoE+ 30W | ||
Over-current protection | Support | ||
Layer 2 switching | |||
Port aggregation | Support GE port aggregation | ||
Support 2.5GE aggregation | |||
Support 10GE aggregation | |||
Support static aggregation | |||
Support LACP dynamic aggregation | |||
Up to 64 aggregation groups and up to 8 ports per group | |||
Port features | Support IEEE802.3x flow control | ||
Support interface counters | |||
Support port isolation | |||
Port mirroring (One-to-One, Many-to-One) | |||
Support loop detection (Port-based; VLAN-based) | |||
Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast) | |||
VLAN | IEEE802.1Q tagged VLAN | ||
Mac based VLAN | |||
IP based VLAN | |||
Protocol based VLAN | |||
Voice VLAN, specially divide VLAN for user voice data flow | |||
Private VLAN, divide a VLAN broadcast domain into multiple subdomains to form a double-layer VLAN structure | |||
VLAN range: 1-4094 | |||
Support access mode/trunk mode/hybrid mode | |||
Mac-address table management | Support static Mac-address management | ||
Support dynamic Mac-address Management | |||
Support filtering Mac-address | |||
Support MAC limit based on port and VLAN | |||
Support MAC flapping based on port and VLAN | |||
16K Mac-address table size | |||
GVRP | Normal mode | ||
Fixed mode | |||
Forbidden mode | |||
QinQ | Port-based QinQ | ||
VLAN-based QinQ | |||
VLAN mapping | |||
Flow-based QinQ | |||
LLDP | Link Layer Discovery Protocol | ||
Med | |||
SPAN | Number of Sessions: 7 | ||
Many-to-one | |||
RSPAN | Remote Switch Port Analyzer | ||
MSTP | 802.1D STP | ||
802.1W RSTP | |||
802.1S MSTP | |||
BPDU Guard | |||
Number of Single Ring Device Connections: 20 | |||
ERPS G.8032 | Major ring | ||
Sub ring | |||
Recovery time ≤20ms | |||
Number of Single Ring Device Connections: No limit | |||
QoS | QoS Class, Remarking | ||
Support SP, WRR Queue Scheduling | |||
Ingress Port-based Rate-limit | |||
Egress Port-based Rate-limit | |||
Egress port-queue shaper | |||
Policy-based QoS | |||
Port Queue Numbers: 8 | |||
DHCPv4 Snooping | DHCP snooping trust port | ||
DHCP snooping option-82 | |||
DHCP snooping circuit-id and remote-id customized | |||
L2 Multicast | |||
IGMP | IGMP v1, v2, v3 | ||
IGMP Snooping | Internet Group Management Protocol Snooping | ||
Fast Leave | |||
Multicast Table Size: 1K | |||
PIM-SM | Protocol Independent Multicast-Sparse Mode | ||
Security features | |||
ACL | IP Standard ACL IP Extended ACL MAC extend ACL IPv6 ACL Time Range ACL apply on VLAN ACL entries, include input and output | ||
802.1x | Port access control Mac-address access control RADIUS server | ||
Port-security | Port-security | ||
IP source guard | IP Source Guard, Port-based IP/Mac Binding Access | ||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | ||
DAI | Dynamic ARP Inspection | ||
Anti-gateway ARP Spoofing | Prevent Gateway ARP Spoofing | ||
Ddos | Ddos attack protection | ||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | ||
AAA | RADIUS authentication access switch | ||
TACACS authentication access switch | |||
Authorization | |||
Reliability | |||
Loop Detect | Loop detect, based on port or VLAN | ||
EFM | The Ethernet in the first mile, 802.3ah | ||
Management & Maintenance functions | |||
Dual Stack | IPv4 and IPv6 Dual Stack Management | ||
System Log Management | Syslog Level 7 to 0 Corresponding Debug/Info/Notice/Warning/ Err/ Critical/ Alert | ||
Support connecting up to 3 Servers | |||
For IPv4 and IPv6 | |||
User Management | Support password protection, support MD5/SHA256/SHA512 algorithm | ||
Local Management of User Privilege | |||
Remote authorization by RADIUS or TACACS | |||
Enable privilege protection | |||
User password complexity requirements | |||
User login fail protection | |||
User Privilege Level 0 to 15 | |||
Login Service Management | Up to 8 users online simultaneously | ||
Access control based on IPv4 or IPv6 ACL | |||
Firmware Management | Firmware upgraded by WEB | ||
Firmware upgraded by CLI | |||
Dual partition | |||
Web Management | Web Management | ||
Support HTTP V1.1 | |||
Support HTTPS | |||
For IPv4 and IPv6 | |||
CLI management | Console/Telnet command line management | ||
Fault Detection | Ping/Traceroute, For IPv4 and IPv6 | ||
Dying gasp optional | |||
Optical transceiver DDM | |||
One click fault information collection | |||
Cable detection | |||
DNS | Domain Name System | ||
NTP | Network Time Protocol, For IPv4 and IPv6 | ||
Support domain name configuration | |||
Configuration Import /Export | FTP/TFTP based remote configuration import and export | ||
sFlow | Sampled flow | ||
SNMP | Version SNMPV2C/V3 | ||
MQTT | Message Queuing Telemetry Transport | ||
RMON | Support RMON (Remote Monitoring) alarm | ||
PoE management | Support 802.3af/802.3at | ||
Support PD watchdog | |||
Support PoE priority management | |||
Support Max PoE power configuration for each port | |||
Support alarm threshold configuration | |||
Support reserved power configuration | |||
Support PoE schedule | |||
Support POE legacy mode | |||
Dual partition management | Support dual partition switching | ||
Application Protocol Functions | |||
Telnet server | Support telnet server for IPv4 and IPv6 | ||
Telnet client | Support telnet client for IPv4 and IPv6 | ||
SCP (Secure Copy Protocol) | SCP client/server for IPv4 and IPv6 | ||
SFTP | sftp client/server for IPv4 and IPv6 | ||
SSH server | Support login based on user password-SSH2, support IPv4, IPv6 | ||
Support public key-based login | |||
TACACS | Support TACACS (the terminal access controller accesses the control system) | ||
TFTP | Support TFTP Client | ||
Layer 3 features | |||
Static Route | Support VLAN interface and route port | ||
IPv4 static routing table entry configuration | |||
ARP dynamic learning and static configuration | |||
IPv6 static routing table entry configuration | |||
Neighbor discovery and static configuration | |||
Routing prefix table size 4k for IPv4, for IPv6 divide by 4 | |||
DHCPv4 Client | Dynamic host configuration protocol for IPv4 | ||
DHCPv6 Client | Dynamic host configuration protocol for IPv6 | ||
DHCPv4 Relay | DHCP Relay for IPv4 | ||
DHCPv4 Server | DHCP Server for IPv4 | ||
ECMP | Support ECMP (Equal-cost multi-path routing) | ||
Support the configuration of ECMP Max next-hop | |||
Support capacity balanced configuration | |||
Route policy | IPv4 prefix-list | ||
VRRP | Virtual Router Redundancy Protocol | ||
Routing Protocol Specification | |||
RIP | RIPv1/v2 | ||
OSPFv2 | OSPFv2 | ||
BGP4 | BGP4 | ||
BGP Support Routing Recursive ECMP | |||
Support to view the number of neighbors and up/down state | |||
IS-IS | IS-ISv4 | ||
Routing entries | 13K | ||
Switching features | |||
Switching capacity | 128Gbps | ||
Packet forwarding rate | 190.4Mpps | ||
MAC address table | 16K | ||
VLAN | 4K | ||
Buffer | 12Mbit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDX/MIDX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Installation method | Desktop; Rack-mount | ||
Dimension(W*D*H) mm | 440*245*44mm | ||
Weight | 4.2 kg | ||
Operating environment | |||
Operating temperature | 0℃~ +50℃ | ||
Storage/transportation temperature | -10℃~ +70℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Protection | Surge protection of power: 6KV | ||
Surge protection of Ethernet ports: 4KV | |||
ESD: Contact 6kV, Air 8kV | |||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | ＞100,000 hours | ||
Warranty | 3 years | ||
Description | |
LT-S8528XGP-4XS24GT-4BT-AC850 | Layer 3 managed PoE++ switch with 4*1G/2.5G/10G SFP+ ports and 24*10/100/1000M RJ45 PoE ports，1-4 ports support PoE++ 90W; AC 100-240V 50/60Hz input, Max PoE output budget 740W |
LT-S8528XGP-4XS24GT-4BT-2AC850 | Layer 3 managed PoE++ switch with 4*1G/2.5G/10G SFP+ ports and 24*10/100/1000M RJ45 PoE ports，1-4 ports support PoE++ 90W; Redundant AC 100-240V 50/60Hz input, Max PoE output budget 740W |
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
Landline
+86-755-28687362
Whatsapp/Teams/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
Managed Industrial Ethernet Switch
Managed Industrial PoE Switch
Managed Industrial PoE++ Switch
Managed Industrial Boost PoE Switch
Managed Industrial Fiber Bypass Switch
Unmanaged Industrial Ethernet Switch
Unmanaged Industrial PoE/PoE++ Switch
Industrial Media Converter
Industrial PoE Media Converter
Industrial Boost Power Supply
Landline
+86-755-28687362
Whatsapp/Skype/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
SmartByte Manufacturing Facility
Add：7-8th floor, 1st building, Lihe Youke Innovation Base, Zhenlong town, Huiyang district, Huizhou city
SmartByte R & D Center
Add: 2nd building, Huajian Edifice, Technology East Road, Haixi Technology Park, Fuzhou City
Copyright © 2026 SMARTBYTE. All Rights Reserved
