Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
The SmartByte LT-IS3005FP-5TX is the unmanaged industrial grade PoE switch with 4-port 10/100Base-TX PoE downlink and 1-port 10/100Base-TX uplink. It complies with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. Moreover, it is featuring with port isolation, 250m long distance transmission mode (1-4 ports), QoS (1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel.
LT-IS3005FP-5TX is also the high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, such as wide range power input 44-57VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40℃ ~+75℃ as well as high-level EMI/EMC capability and so on. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications.
➢ 4*10/100Base-TX RJ45 PoE ports downlink, 1*10/100Base-TX RJ45 port uplink
➢ DC 44-57V input, redundant power supply with polarity reverse protection
➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
➢ Dip switch function: 1.Port isolation; 2. 250m long distance; 3. QoS; 4.PoE watchdog
➢ Support 2K Bytes Jumbo frame
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS3005FP-5TX | |||
Interface | Fiber port | Copper RJ45 ports | ||
0 | 5 | |||
Ethernet | 4*10/100Base-TX PoE downlink, 1*10/100Base-TX RJ45 uplink | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Power-Over-Ethernet IEEE 802.3at Power Over Ethernet plus PSE | |||
Dip Switch | 1. Port Isolation 2. 250m long distance mode (1-4 ports) 3. QoS(1-2 ports） 4. PoE watchdog | |||
LED Indicators | P(Power indicator) Green | Off: the device is power off or failed | ||
On: the device power on is normal | ||||
S(PoE usage indicator) Red | Off: total PoE usage ＜rated 50% | |||
Blinking: rated 50%＜total PoE usage＜rated 90% | ||||
On: total PoE usage≥rated 90% | ||||
1-4(Copper ports) | Green indicators | |||
Off: ports link down | Off: PoE not working | |||
On: ports link up | On: PoE working | |||
Blinking: data on TX/RX | ||||
5 ( Copper ports) | Green indicators | Yellow indicators | ||
Off: ports link down | Off: port speed is 10M | |||
On: ports link up | On: port speed is 100M | |||
Blinking: data on TX/RX | ||||
Power parameters | ||||
Input voltage | 44-57VDC, redundant power input | |||
Input current | 3A Max | |||
Total power consumption | Full loading without PoE ≤4W PoE power budget ≤120W | |||
Connector | Removable 4-pin terminal block | |||
Switching features | ||||
Switching capacity | 1G | |||
Packet forwarding rate | 1.48 Mpps | |||
MAC address table | 2K | |||
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | |||
Buffer | 16K | |||
Forwarding delay | <10us | |||
Jumbo Frame | Support 2Kbytes | |||
MDI/MDIX | Support | |||
Watchdog | Support | |||
Network Topology | ||||
Star topology | Support | |||
Bus topology | Support | |||
Tree Topology | Support | |||
Mechanical structure | ||||
Case protection | IP40 | |||
Installation method | Din-rail | |||
Dimension(W*D*H)mm | 30*98*130mm | |||
Weight | 0.5 kg | |||
Operating environment | ||||
Operating temperature | -40℃~+75℃ | |||
Storage/transportation temperature | -40℃~+85℃ | |||
Relative humidity | 5%~95%（non-condensing） | |||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | |||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | ||||
DIP: IEC 61000-4-11 Level 3（10V） | ||||
ESD: IEC 61000-4-2 Level 4（8K/15K） | ||||
Shock：IEC 60068-2-27 | ||||
Free fall：IEC 60068-2-32 | ||||
Vibration：IEC 60068-2-6 | ||||
Certification | CCC/CE/FCC/RoHS/UKCA/Reach | |||
MTBF | ＞200,000 hours | |||
Warranty | 5 years | |||
Model | Description |
LT-IS3005FP-5TX | Unmanaged industrial PoE switch with 4*10/100Base-TX PoE downlink and 1*10/100Base-TX RJ45 uplink , complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply; Din-rail installation, Operation temperature: -40℃～+75℃ |
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
The SmartByte LT-IS3005FP-5TX is the unmanaged industrial grade PoE switch with 4-port 10/100Base-TX PoE downlink and 1-port 10/100Base-TX uplink. It complies with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. Moreover, it is featuring with port isolation, 250m long distance transmission mode (1-4 ports), QoS (1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel.
LT-IS3005FP-5TX is also the high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, such as wide range power input 44-57VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40℃ ~+75℃ as well as high-level EMI/EMC capability and so on. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications.
➢ 4*10/100Base-TX RJ45 PoE ports downlink, 1*10/100Base-TX RJ45 port uplink
➢ DC 44-57V input, redundant power supply with polarity reverse protection
➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
➢ Dip switch function: 1.Port isolation; 2. 250m long distance; 3. QoS; 4.PoE watchdog
➢ Support 2K Bytes Jumbo frame
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS3005FP-5TX | |||
Interface | Fiber port | Copper RJ45 ports | ||
0 | 5 | |||
Ethernet | 4*10/100Base-TX PoE downlink, 1*10/100Base-TX RJ45 uplink | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Power-Over-Ethernet IEEE 802.3at Power Over Ethernet plus PSE | |||
Dip Switch | 1. Port Isolation 2. 250m long distance mode (1-4 ports) 3. QoS(1-2 ports） 4. PoE watchdog | |||
LED Indicators | P(Power indicator) Green | Off: the device is power off or failed | ||
On: the device power on is normal | ||||
S(PoE usage indicator) Red | Off: total PoE usage ＜rated 50% | |||
Blinking: rated 50%＜total PoE usage＜rated 90% | ||||
On: total PoE usage≥rated 90% | ||||
1-4(Copper ports) | Green indicators | |||
Off: ports link down | Off: PoE not working | |||
On: ports link up | On: PoE working | |||
Blinking: data on TX/RX | ||||
5 ( Copper ports) | Green indicators | Yellow indicators | ||
Off: ports link down | Off: port speed is 10M | |||
On: ports link up | On: port speed is 100M | |||
Blinking: data on TX/RX | ||||
Power parameters | ||||
Input voltage | 44-57VDC, redundant power input | |||
Input current | 3A Max | |||
Total power consumption | Full loading without PoE ≤4W PoE power budget ≤120W | |||
Connector | Removable 4-pin terminal block | |||
Switching features | ||||
Switching capacity | 1G | |||
Packet forwarding rate | 1.48 Mpps | |||
MAC address table | 2K | |||
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | |||
Buffer | 16K | |||
Forwarding delay | <10us | |||
Jumbo Frame | Support 2Kbytes | |||
MDI/MDIX | Support | |||
Watchdog | Support | |||
Network Topology | ||||
Star topology | Support | |||
Bus topology | Support | |||
Tree Topology | Support | |||
Mechanical structure | ||||
Case protection | IP40 | |||
Installation method | Din-rail | |||
Dimension(W*D*H)mm | 30*98*130mm | |||
Weight | 0.5 kg | |||
Operating environment | ||||
Operating temperature | -40℃~+75℃ | |||
Storage/transportation temperature | -40℃~+85℃ | |||
Relative humidity | 5%~95%（non-condensing） | |||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | |||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | ||||
DIP: IEC 61000-4-11 Level 3（10V） | ||||
ESD: IEC 61000-4-2 Level 4（8K/15K） | ||||
Shock：IEC 60068-2-27 | ||||
Free fall：IEC 60068-2-32 | ||||
Vibration：IEC 60068-2-6 | ||||
Certification | CCC/CE/FCC/RoHS/UKCA/Reach | |||
MTBF | ＞200,000 hours | |||
Warranty | 5 years | |||
Model | Description |
LT-IS3005FP-5TX | Unmanaged industrial PoE switch with 4*10/100Base-TX PoE downlink and 1*10/100Base-TX RJ45 uplink , complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply; Din-rail installation, Operation temperature: -40℃～+75℃ |
Copy product links
Long by picture save/share
LT-IS3005FP-5TX
The SmartByte LT-IS3005FP-5TX is the unmanaged industrial grade PoE switch with 4-port 10/100Base-TX PoE downlink and 1-port 10/100Base-TX uplink. It complies with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. Moreover, it is featuring with port isolation, 250m long distance transmission mode (1-4 ports), QoS (1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel.
LT-IS3005FP-5TX is also the high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, such as wide range power input 44-57VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40℃ ~+75℃ as well as high-level EMI/EMC capability and so on. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications.
➢ 4*10/100Base-TX RJ45 PoE ports downlink, 1*10/100Base-TX RJ45 port uplink
➢ DC 44-57V input, redundant power supply with polarity reverse protection
➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
➢ Dip switch function: 1.Port isolation; 2. 250m long distance; 3. QoS; 4.PoE watchdog
➢ Support 2K Bytes Jumbo frame
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS3005FP-5TX | |||
Interface | Fiber port | Copper RJ45 ports | ||
0 | 5 | |||
Ethernet | 4*10/100Base-TX PoE downlink, 1*10/100Base-TX RJ45 uplink | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Power-Over-Ethernet IEEE 802.3at Power Over Ethernet plus PSE | |||
Dip Switch | 1. Port Isolation 2. 250m long distance mode (1-4 ports) 3. QoS(1-2 ports） 4. PoE watchdog | |||
LED Indicators | P(Power indicator) Green | Off: the device is power off or failed | ||
On: the device power on is normal | ||||
S(PoE usage indicator) Red | Off: total PoE usage ＜rated 50% | |||
Blinking: rated 50%＜total PoE usage＜rated 90% | ||||
On: total PoE usage≥rated 90% | ||||
1-4(Copper ports) | Green indicators | |||
Off: ports link down | Off: PoE not working | |||
On: ports link up | On: PoE working | |||
Blinking: data on TX/RX | ||||
5 ( Copper ports) | Green indicators | Yellow indicators | ||
Off: ports link down | Off: port speed is 10M | |||
On: ports link up | On: port speed is 100M | |||
Blinking: data on TX/RX | ||||
Power parameters | ||||
Input voltage | 44-57VDC, redundant power input | |||
Input current | 3A Max | |||
Total power consumption | Full loading without PoE ≤4W PoE power budget ≤120W | |||
Connector | Removable 4-pin terminal block | |||
Switching features | ||||
Switching capacity | 1G | |||
Packet forwarding rate | 1.48 Mpps | |||
MAC address table | 2K | |||
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | |||
Buffer | 16K | |||
Forwarding delay | <10us | |||
Jumbo Frame | Support 2Kbytes | |||
MDI/MDIX | Support | |||
Watchdog | Support | |||
Network Topology | ||||
Star topology | Support | |||
Bus topology | Support | |||
Tree Topology | Support | |||
Mechanical structure | ||||
Case protection | IP40 | |||
Installation method | Din-rail | |||
Dimension(W*D*H)mm | 30*98*130mm | |||
Weight | 0.5 kg | |||
Operating environment | ||||
Operating temperature | -40℃~+75℃ | |||
Storage/transportation temperature | -40℃~+85℃ | |||
Relative humidity | 5%~95%（non-condensing） | |||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | |||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | ||||
DIP: IEC 61000-4-11 Level 3（10V） | ||||
ESD: IEC 61000-4-2 Level 4（8K/15K） | ||||
Shock：IEC 60068-2-27 | ||||
Free fall：IEC 60068-2-32 | ||||
Vibration：IEC 60068-2-6 | ||||
Certification | CCC/CE/FCC/RoHS/UKCA/Reach | |||
MTBF | ＞200,000 hours | |||
Warranty | 5 years | |||
Model | Description |
LT-IS3005FP-5TX | Unmanaged industrial PoE switch with 4*10/100Base-TX PoE downlink and 1*10/100Base-TX RJ45 uplink , complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply; Din-rail installation, Operation temperature: -40℃～+75℃ |
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
Landline
+86-755-28687362
Whatsapp/Teams/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
Managed Industrial Ethernet Switch
Managed Industrial PoE Switch
Managed Industrial PoE++ Switch
Managed Industrial Boost PoE Switch
Managed Industrial Fiber Bypass Switch
Unmanaged Industrial Ethernet Switch
Unmanaged Industrial PoE/PoE++ Switch
Industrial Media Converter
Industrial PoE Media Converter
Industrial Boost Power Supply
Landline
+86-755-28687362
Whatsapp/Skype/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
SmartByte Manufacturing Facility
Add：7-8th floor, 1st building, Lihe Youke Innovation Base, Zhenlong town, Huiyang district, Huizhou city
SmartByte R & D Center
Add: 2nd building, Huajian Edifice, Technology East Road, Haixi Technology Park, Fuzhou City
Copyright © 2026 SMARTBYTE. All Rights Reserved
