LT-IS6310G-2GX8GT
The SmartByte LT-IS6310G-2GX8GT is the highly reliable managed industrial Ethernet switch with 8-port 10/100/1000-T, 2-port 1G/2.5GBase-X SFP. It supports ERPS redundant network and the self-recovery mechanism less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. IPv4/IPv6 static routing, DHCP server, robust Layer 2 management and secure functions can help users expand their networks quickly and efficiently.
LT-IS6310G-2GX8GT is also the high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
➢ 8*10/100/1000Base-T RJ45, 2*1G/2.5GBase-X SFP
➢ DC 12-58V input, redundant power supply with polarity reverse/over-current protection
➢ Layer 3 features: Support IPv4/IPv6 static routing, DHCP server, DHCP relay
➢ Layer 2 features: VLAN/GVRP/QinQ/SPAN/RSPAN/STP, RSTP, MSTP/DHCP/Multicast/ACL
QoS/LLDP/802.1X/AAA/Loop Detect/Dying Gasp/SFP DDM/IPV6 management/Dual Stack/ sFlow/Web/SNMP/MQTT/Telnet/TFTP/Web upgrading
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS6310G-2GX8GT | ||
Interface | Fiber ports | Copper RJ45 ports | |
2 | 8 | ||
Ethernet | 8*10/100/1000Base-T RJ45 2*1G/2.5GBase-X SFP | ||
CPU | Marvell AC5 series 1.2GHz | ||
Size of RAM | 512MB | ||
Size of Flash | 512MB | ||
Switch chip model | Marvell AC5 series | ||
Management port | 1*RJ45 Console port (115200,8,N,1) | ||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | ||
LED Indicators | |||
P (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | |
S (System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-8 (Copper ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
1-8 (Port speed indicators) Yellow | Off: Port speed on 10/100M | ||
On: Port speed on 1000M | |||
9-10 (Fiber ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | 12-58VDC redundant power input | ||
Input current | 0.9A Max | ||
Total power consumption | Full loading ≤10W | ||
Connector | Removable 4-pin terminal block | ||
Reverse polarity protection | Support | ||
Over-current protection | Support | ||
Layer 2 switching | |||
Port aggregation | Support GE port aggregation | ||
Support 2.5GE aggregation | |||
Support static aggregation | |||
Support LACP dynamic aggregation | |||
Up to 64 aggregation groups and up to 8 ports per group | |||
Port features | Support IEEE802.3x flow control | ||
Support interface counters | |||
Support port isolation | |||
Port mirroring (One-to-One, Many-to-One) | |||
Support loop detection (Port-based; VLAN-based) | |||
Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast) | |||
VLAN | IEEE802.1Q tagged VLAN | ||
Mac based VLAN | |||
IP based VLAN | |||
Protocol based VLAN | |||
Voice VLAN, specially divide VLAN for user voice data flow | |||
Private VLAN, divide a VLAN broadcast domain into multiple subdomains to form a double-layer VLAN structure | |||
VLAN range: 1-4094 | |||
Support access mode/trunk mode/hybrid mode | |||
Mac-address table management | Support static Mac-address management | ||
Support dynamic Mac-address Management | |||
Support filtering Mac-address | |||
Support MAC limit based on port and VLAN | |||
Support MAC flapping based on port and VLAN | |||
16K Mac-address table size | |||
GVRP | Normal mode | ||
Fixed mode | |||
Forbidden mode | |||
QinQ | Port-based QinQ | ||
VLAN-based QinQ | |||
VLAN mapping | |||
Flow-based QinQ | |||
LLDP | Link Layer Discovery Protocol | ||
Med | |||
SPAN | Number of Sessions: 7 | ||
Many-to-one | |||
RSPAN | Remote Switch Port Analyzer | ||
MSTP | 802.1D STP | ||
802.1W RSTP | |||
802.1S MSTP | |||
BPDU Guard | |||
Number of Single Ring Device Connections: 20 | |||
ERPS G.8032 | Major ring | ||
Sub ring | |||
Recovery time ≤20ms | |||
Number of Single Ring Device Connections: No limit | |||
QoS | QoS Class, Remarking | ||
Support SP, WRR Queue Scheduling | |||
Ingress Port-based Rate-limit | |||
Egress Port-based Rate-limit | |||
Egress port-queue shaper | |||
Policy-based QoS | |||
Port Queue Numbers: 8 | |||
DHCPv4 Snooping | DHCP snooping trust port | ||
DHCP snooping option-82 | |||
DHCP snooping circuit-id and remote-id customized | |||
L2 Multicast | |||
IGMP | IGMP v1, v2, v3 | ||
IGMP Snooping | Internet Group Management Protocol Snooping | ||
Fast Leave | |||
Multicast Table Size: 1K | |||
PIM-SM | Protocol Independent Multicast-Sparse Mode | ||
Security features | |||
ACL | IP Standard ACL IP Extended ACL MAC extend ACL IPv6 ACL Time Range ACL apply on VLAN ACL entries, include input and output | ||
802.1x | Port access control Mac-address access control RADIUS server | ||
Port-security | Port-security | ||
IP source guard | IP Source Guard, Port-based IP/Mac Binding Access | ||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | ||
DAI | Dynamic ARP Inspection | ||
Anti-gateway ARP Spoofing | Prevent Gateway ARP Spoofing | ||
Ddos | Ddos attack protection | ||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | ||
AAA | RADIUS authentication access switch | ||
TACACS authentication access switch | |||
Authorization | |||
Reliability | |||
Loop Detect | Loop detect, based on port or VLAN | ||
EFM | The Ethernet in the first mile, 802.3ah | ||
Management & Maintenance functions | |||
Dual Stack | IPv4 and IPv6 Dual Stack Management | ||
System Log Management | Syslog Level 7 to 0 Corresponding Debug/Info/Notice/Warning/ Err/ Critical/ Alert | ||
Support connecting up to 3 Servers | |||
For IPv4 and IPv6 | |||
User Management | Support password protection, support MD5/SHA256/SHA512 algorithm | ||
Local Management of User Privilege | |||
Remote authorization by RADIUS or TARCAS | |||
Enable privilege protection | |||
User password complexity requirements | |||
User login fail protection | |||
User Privilege Level 0 to 15 | |||
Login Service Management | Up to 8 users online simultaneously | ||
Access control based on IPv4 or IPv6 ACL | |||
Firmware Management | Firmware upgraded by WEB | ||
Firmware upgraded by CLI | |||
Dual partition | |||
Web Management | Web Management | ||
Support HTTP V1.1 | |||
Support HTTPS | |||
For IPv4 and IPv6 | |||
CLI management | Console/Telnet command line management | ||
Fault Detection | Ping/Traceroute, For IPv4 and IPv6 | ||
Dying gasp (the input voltage should be more than 18V) | |||
Optical transceiver DDM | |||
One click fault information collection | |||
Cable detection | |||
DNS | Domain Name System | ||
NTP | Network Time Protocol, For IPv4 and IPv6 | ||
Support domain name configuration | |||
Configuration Import /Export | FTP/TFTP based remote configuration import and export | ||
sFlow | Sampled flow | ||
SNMP | Version SNMPV2C/V3 | ||
MQTT | Message Queuing Telemetry Transport | ||
RMON | Support RMON (Remote Monitoring) alarm | ||
Dual partition management | Support dual partition switching | ||
Application Protocol Functions | |||
Telnet server | Support telnet server for IPv4 and IPv6 | ||
Telnet client | Support telnet client for IPv4 and IPv6 | ||
SCP (Secure Copy Protocol) | SCP client/server for IPv4 and IPv6 | ||
SFTP | sftp client/server for IPv4 and IPv6 | ||
SSH server | Support login based on user password-SSH2, support IPv4, IPv6 | ||
Support public key-based login | |||
TACACS | Support TACACS (the terminal access controller accesses the control system) | ||
TFTP | Support TFTP Client | ||
Layer 3 features | |||
Static Route | Support VLAN interface and route port | ||
IPv4 static routing table entry configuration | |||
ARP dynamic learning and static configuration | |||
IPv6 static routing table entry configuration | |||
Neighbor discovery and static configuration | |||
Routing prefix table size 4k for IPv4, for IPv6 divide by 4 | |||
DHCPv4 Client | Dynamic host configuration protocol for IPv4 | ||
DHCPv6 Client | Dynamic host configuration protocol for IPv6 | ||
DHCPv4 Relay | DHCP Relay for IPv4 | ||
DHCPv4 Server | DHCP Server for IPv4 | ||
Switching features | |||
Switching capacity | 26Gbps | ||
Packet forwarding rate | 38.6Mpps | ||
MAC address table | 16K | ||
VLAN | 4K | ||
Buffer | 12Mbit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDI/MDIX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Case protection | IP40 | ||
Installation method | Din-rail | ||
Dimension(W*D*H)mm | 54*115*158mm | ||
Weight | 1.25 kg | ||
Operating environment | |||
Operating temperature | -40℃~+75℃ | ||
Storage/transportation temperature | -40℃~+85℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Industrial Standard | |||
EMS | Surge protection of power: IEC 61000-4-5 6KV/4KV(8/20us) | ||
Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) | |||
RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m | |||
EFT:IEC 61000-4-4 4K/2K | |||
CS:IEC 61000-4-6 10V | |||
ESD:IEC 61000-4-2 Contact: 8K;Air: 15K | |||
EMI | FCC Part 15B Class A | ||
Shock | IEC 60068-2-27 | ||
Free fall | IEC 60068-2-32 | ||
Vibration | IEC 60068-2-6 | ||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | >200,000 hours | ||
Warranty | 5 years | ||
Model | Description |
LT-IS6310G-2GX8GT | L2+ Managed industrial Ethernet switch with 8*10/100/1000Base-T RJ45 ports, 2*1G/2.5GBase-X SFP slots, DC12-58V input, redundant dual power supply; Din-rail installation. Operation temperature: -40℃~+75℃ |

Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
LT-IS6310G-2GX8GT
The SmartByte LT-IS6310G-2GX8GT is the highly reliable managed industrial Ethernet switch with 8-port 10/100/1000-T, 2-port 1G/2.5GBase-X SFP. It supports ERPS redundant network and the self-recovery mechanism less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. IPv4/IPv6 static routing, DHCP server, robust Layer 2 management and secure functions can help users expand their networks quickly and efficiently.
LT-IS6310G-2GX8GT is also the high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
➢ 8*10/100/1000Base-T RJ45, 2*1G/2.5GBase-X SFP
➢ DC 12-58V input, redundant power supply with polarity reverse/over-current protection
➢ Layer 3 features: Support IPv4/IPv6 static routing, DHCP server, DHCP relay
➢ Layer 2 features: VLAN/GVRP/QinQ/SPAN/RSPAN/STP, RSTP, MSTP/DHCP/Multicast/ACL
QoS/LLDP/802.1X/AAA/Loop Detect/Dying Gasp/SFP DDM/IPV6 management/Dual Stack/ sFlow/Web/SNMP/MQTT/Telnet/TFTP/Web upgrading
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS6310G-2GX8GT | ||
Interface | Fiber ports | Copper RJ45 ports | |
2 | 8 | ||
Ethernet | 8*10/100/1000Base-T RJ45 2*1G/2.5GBase-X SFP | ||
CPU | Marvell AC5 series 1.2GHz | ||
Size of RAM | 512MB | ||
Size of Flash | 512MB | ||
Switch chip model | Marvell AC5 series | ||
Management port | 1*RJ45 Console port (115200,8,N,1) | ||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | ||
LED Indicators | |||
P (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | |
S (System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-8 (Copper ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
1-8 (Port speed indicators) Yellow | Off: Port speed on 10/100M | ||
On: Port speed on 1000M | |||
9-10 (Fiber ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | 12-58VDC redundant power input | ||
Input current | 0.9A Max | ||
Total power consumption | Full loading ≤10W | ||
Connector | Removable 4-pin terminal block | ||
Reverse polarity protection | Support | ||
Over-current protection | Support | ||
Layer 2 switching | |||
Port aggregation | Support GE port aggregation | ||
Support 2.5GE aggregation | |||
Support static aggregation | |||
Support LACP dynamic aggregation | |||
Up to 64 aggregation groups and up to 8 ports per group | |||
Port features | Support IEEE802.3x flow control | ||
Support interface counters | |||
Support port isolation | |||
Port mirroring (One-to-One, Many-to-One) | |||
Support loop detection (Port-based; VLAN-based) | |||
Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast) | |||
VLAN | IEEE802.1Q tagged VLAN | ||
Mac based VLAN | |||
IP based VLAN | |||
Protocol based VLAN | |||
Voice VLAN, specially divide VLAN for user voice data flow | |||
Private VLAN, divide a VLAN broadcast domain into multiple subdomains to form a double-layer VLAN structure | |||
VLAN range: 1-4094 | |||
Support access mode/trunk mode/hybrid mode | |||
Mac-address table management | Support static Mac-address management | ||
Support dynamic Mac-address Management | |||
Support filtering Mac-address | |||
Support MAC limit based on port and VLAN | |||
Support MAC flapping based on port and VLAN | |||
16K Mac-address table size | |||
GVRP | Normal mode | ||
Fixed mode | |||
Forbidden mode | |||
QinQ | Port-based QinQ | ||
VLAN-based QinQ | |||
VLAN mapping | |||
Flow-based QinQ | |||
LLDP | Link Layer Discovery Protocol | ||
Med | |||
SPAN | Number of Sessions: 7 | ||
Many-to-one | |||
RSPAN | Remote Switch Port Analyzer | ||
MSTP | 802.1D STP | ||
802.1W RSTP | |||
802.1S MSTP | |||
BPDU Guard | |||
Number of Single Ring Device Connections: 20 | |||
ERPS G.8032 | Major ring | ||
Sub ring | |||
Recovery time ≤20ms | |||
Number of Single Ring Device Connections: No limit | |||
QoS | QoS Class, Remarking | ||
Support SP, WRR Queue Scheduling | |||
Ingress Port-based Rate-limit | |||
Egress Port-based Rate-limit | |||
Egress port-queue shaper | |||
Policy-based QoS | |||
Port Queue Numbers: 8 | |||
DHCPv4 Snooping | DHCP snooping trust port | ||
DHCP snooping option-82 | |||
DHCP snooping circuit-id and remote-id customized | |||
L2 Multicast | |||
IGMP | IGMP v1, v2, v3 | ||
IGMP Snooping | Internet Group Management Protocol Snooping | ||
Fast Leave | |||
Multicast Table Size: 1K | |||
PIM-SM | Protocol Independent Multicast-Sparse Mode | ||
Security features | |||
ACL | IP Standard ACL IP Extended ACL MAC extend ACL IPv6 ACL Time Range ACL apply on VLAN ACL entries, include input and output | ||
802.1x | Port access control Mac-address access control RADIUS server | ||
Port-security | Port-security | ||
IP source guard | IP Source Guard, Port-based IP/Mac Binding Access | ||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | ||
DAI | Dynamic ARP Inspection | ||
Anti-gateway ARP Spoofing | Prevent Gateway ARP Spoofing | ||
Ddos | Ddos attack protection | ||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | ||
AAA | RADIUS authentication access switch | ||
TACACS authentication access switch | |||
Authorization | |||
Reliability | |||
Loop Detect | Loop detect, based on port or VLAN | ||
EFM | The Ethernet in the first mile, 802.3ah | ||
Management & Maintenance functions | |||
Dual Stack | IPv4 and IPv6 Dual Stack Management | ||
System Log Management | Syslog Level 7 to 0 Corresponding Debug/Info/Notice/Warning/ Err/ Critical/ Alert | ||
Support connecting up to 3 Servers | |||
For IPv4 and IPv6 | |||
User Management | Support password protection, support MD5/SHA256/SHA512 algorithm | ||
Local Management of User Privilege | |||
Remote authorization by RADIUS or TARCAS | |||
Enable privilege protection | |||
User password complexity requirements | |||
User login fail protection | |||
User Privilege Level 0 to 15 | |||
Login Service Management | Up to 8 users online simultaneously | ||
Access control based on IPv4 or IPv6 ACL | |||
Firmware Management | Firmware upgraded by WEB | ||
Firmware upgraded by CLI | |||
Dual partition | |||
Web Management | Web Management | ||
Support HTTP V1.1 | |||
Support HTTPS | |||
For IPv4 and IPv6 | |||
CLI management | Console/Telnet command line management | ||
Fault Detection | Ping/Traceroute, For IPv4 and IPv6 | ||
Dying gasp (the input voltage should be more than 18V) | |||
Optical transceiver DDM | |||
One click fault information collection | |||
Cable detection | |||
DNS | Domain Name System | ||
NTP | Network Time Protocol, For IPv4 and IPv6 | ||
Support domain name configuration | |||
Configuration Import /Export | FTP/TFTP based remote configuration import and export | ||
sFlow | Sampled flow | ||
SNMP | Version SNMPV2C/V3 | ||
MQTT | Message Queuing Telemetry Transport | ||
RMON | Support RMON (Remote Monitoring) alarm | ||
Dual partition management | Support dual partition switching | ||
Application Protocol Functions | |||
Telnet server | Support telnet server for IPv4 and IPv6 | ||
Telnet client | Support telnet client for IPv4 and IPv6 | ||
SCP (Secure Copy Protocol) | SCP client/server for IPv4 and IPv6 | ||
SFTP | sftp client/server for IPv4 and IPv6 | ||
SSH server | Support login based on user password-SSH2, support IPv4, IPv6 | ||
Support public key-based login | |||
TACACS | Support TACACS (the terminal access controller accesses the control system) | ||
TFTP | Support TFTP Client | ||
Layer 3 features | |||
Static Route | Support VLAN interface and route port | ||
IPv4 static routing table entry configuration | |||
ARP dynamic learning and static configuration | |||
IPv6 static routing table entry configuration | |||
Neighbor discovery and static configuration | |||
Routing prefix table size 4k for IPv4, for IPv6 divide by 4 | |||
DHCPv4 Client | Dynamic host configuration protocol for IPv4 | ||
DHCPv6 Client | Dynamic host configuration protocol for IPv6 | ||
DHCPv4 Relay | DHCP Relay for IPv4 | ||
DHCPv4 Server | DHCP Server for IPv4 | ||
Switching features | |||
Switching capacity | 26Gbps | ||
Packet forwarding rate | 38.6Mpps | ||
MAC address table | 16K | ||
VLAN | 4K | ||
Buffer | 12Mbit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDI/MDIX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Case protection | IP40 | ||
Installation method | Din-rail | ||
Dimension(W*D*H)mm | 54*115*158mm | ||
Weight | 1.25 kg | ||
Operating environment | |||
Operating temperature | -40℃~+75℃ | ||
Storage/transportation temperature | -40℃~+85℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Industrial Standard | |||
EMS | Surge protection of power: IEC 61000-4-5 6KV/4KV(8/20us) | ||
Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) | |||
RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m | |||
EFT:IEC 61000-4-4 4K/2K | |||
CS:IEC 61000-4-6 10V | |||
ESD:IEC 61000-4-2 Contact: 8K;Air: 15K | |||
EMI | FCC Part 15B Class A | ||
Shock | IEC 60068-2-27 | ||
Free fall | IEC 60068-2-32 | ||
Vibration | IEC 60068-2-6 | ||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | >200,000 hours | ||
Warranty | 5 years | ||
Model | Description |
LT-IS6310G-2GX8GT | L2+ Managed industrial Ethernet switch with 8*10/100/1000Base-T RJ45 ports, 2*1G/2.5GBase-X SFP slots, DC12-58V input, redundant dual power supply; Din-rail installation. Operation temperature: -40℃~+75℃ |

Copy product links
Long by picture save/share
LT-IS6310G-2GX8GT
The SmartByte LT-IS6310G-2GX8GT is the highly reliable managed industrial Ethernet switch with 8-port 10/100/1000-T, 2-port 1G/2.5GBase-X SFP. It supports ERPS redundant network and the self-recovery mechanism less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. IPv4/IPv6 static routing, DHCP server, robust Layer 2 management and secure functions can help users expand their networks quickly and efficiently.
LT-IS6310G-2GX8GT is also the high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
➢ 8*10/100/1000Base-T RJ45, 2*1G/2.5GBase-X SFP
➢ DC 12-58V input, redundant power supply with polarity reverse/over-current protection
➢ Layer 3 features: Support IPv4/IPv6 static routing, DHCP server, DHCP relay
➢ Layer 2 features: VLAN/GVRP/QinQ/SPAN/RSPAN/STP, RSTP, MSTP/DHCP/Multicast/ACL
QoS/LLDP/802.1X/AAA/Loop Detect/Dying Gasp/SFP DDM/IPV6 management/Dual Stack/ sFlow/Web/SNMP/MQTT/Telnet/TFTP/Web upgrading
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS6310G-2GX8GT | ||
Interface | Fiber ports | Copper RJ45 ports | |
2 | 8 | ||
Ethernet | 8*10/100/1000Base-T RJ45 2*1G/2.5GBase-X SFP | ||
CPU | Marvell AC5 series 1.2GHz | ||
Size of RAM | 512MB | ||
Size of Flash | 512MB | ||
Switch chip model | Marvell AC5 series | ||
Management port | 1*RJ45 Console port (115200,8,N,1) | ||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | ||
LED Indicators | |||
P (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | |
S (System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-8 (Copper ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
1-8 (Port speed indicators) Yellow | Off: Port speed on 10/100M | ||
On: Port speed on 1000M | |||
9-10 (Fiber ports indicators) Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | 12-58VDC redundant power input | ||
Input current | 0.9A Max | ||
Total power consumption | Full loading ≤10W | ||
Connector | Removable 4-pin terminal block | ||
Reverse polarity protection | Support | ||
Over-current protection | Support | ||
Layer 2 switching | |||
Port aggregation | Support GE port aggregation | ||
Support 2.5GE aggregation | |||
Support static aggregation | |||
Support LACP dynamic aggregation | |||
Up to 64 aggregation groups and up to 8 ports per group | |||
Port features | Support IEEE802.3x flow control | ||
Support interface counters | |||
Support port isolation | |||
Port mirroring (One-to-One, Many-to-One) | |||
Support loop detection (Port-based; VLAN-based) | |||
Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast) | |||
VLAN | IEEE802.1Q tagged VLAN | ||
Mac based VLAN | |||
IP based VLAN | |||
Protocol based VLAN | |||
Voice VLAN, specially divide VLAN for user voice data flow | |||
Private VLAN, divide a VLAN broadcast domain into multiple subdomains to form a double-layer VLAN structure | |||
VLAN range: 1-4094 | |||
Support access mode/trunk mode/hybrid mode | |||
Mac-address table management | Support static Mac-address management | ||
Support dynamic Mac-address Management | |||
Support filtering Mac-address | |||
Support MAC limit based on port and VLAN | |||
Support MAC flapping based on port and VLAN | |||
16K Mac-address table size | |||
GVRP | Normal mode | ||
Fixed mode | |||
Forbidden mode | |||
QinQ | Port-based QinQ | ||
VLAN-based QinQ | |||
VLAN mapping | |||
Flow-based QinQ | |||
LLDP | Link Layer Discovery Protocol | ||
Med | |||
SPAN | Number of Sessions: 7 | ||
Many-to-one | |||
RSPAN | Remote Switch Port Analyzer | ||
MSTP | 802.1D STP | ||
802.1W RSTP | |||
802.1S MSTP | |||
BPDU Guard | |||
Number of Single Ring Device Connections: 20 | |||
ERPS G.8032 | Major ring | ||
Sub ring | |||
Recovery time ≤20ms | |||
Number of Single Ring Device Connections: No limit | |||
QoS | QoS Class, Remarking | ||
Support SP, WRR Queue Scheduling | |||
Ingress Port-based Rate-limit | |||
Egress Port-based Rate-limit | |||
Egress port-queue shaper | |||
Policy-based QoS | |||
Port Queue Numbers: 8 | |||
DHCPv4 Snooping | DHCP snooping trust port | ||
DHCP snooping option-82 | |||
DHCP snooping circuit-id and remote-id customized | |||
L2 Multicast | |||
IGMP | IGMP v1, v2, v3 | ||
IGMP Snooping | Internet Group Management Protocol Snooping | ||
Fast Leave | |||
Multicast Table Size: 1K | |||
PIM-SM | Protocol Independent Multicast-Sparse Mode | ||
Security features | |||
ACL | IP Standard ACL IP Extended ACL MAC extend ACL IPv6 ACL Time Range ACL apply on VLAN ACL entries, include input and output | ||
802.1x | Port access control Mac-address access control RADIUS server | ||
Port-security | Port-security | ||
IP source guard | IP Source Guard, Port-based IP/Mac Binding Access | ||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | ||
DAI | Dynamic ARP Inspection | ||
Anti-gateway ARP Spoofing | Prevent Gateway ARP Spoofing | ||
Ddos | Ddos attack protection | ||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | ||
AAA | RADIUS authentication access switch | ||
TACACS authentication access switch | |||
Authorization | |||
Reliability | |||
Loop Detect | Loop detect, based on port or VLAN | ||
EFM | The Ethernet in the first mile, 802.3ah | ||
Management & Maintenance functions | |||
Dual Stack | IPv4 and IPv6 Dual Stack Management | ||
System Log Management | Syslog Level 7 to 0 Corresponding Debug/Info/Notice/Warning/ Err/ Critical/ Alert | ||
Support connecting up to 3 Servers | |||
For IPv4 and IPv6 | |||
User Management | Support password protection, support MD5/SHA256/SHA512 algorithm | ||
Local Management of User Privilege | |||
Remote authorization by RADIUS or TARCAS | |||
Enable privilege protection | |||
User password complexity requirements | |||
User login fail protection | |||
User Privilege Level 0 to 15 | |||
Login Service Management | Up to 8 users online simultaneously | ||
Access control based on IPv4 or IPv6 ACL | |||
Firmware Management | Firmware upgraded by WEB | ||
Firmware upgraded by CLI | |||
Dual partition | |||
Web Management | Web Management | ||
Support HTTP V1.1 | |||
Support HTTPS | |||
For IPv4 and IPv6 | |||
CLI management | Console/Telnet command line management | ||
Fault Detection | Ping/Traceroute, For IPv4 and IPv6 | ||
Dying gasp (the input voltage should be more than 18V) | |||
Optical transceiver DDM | |||
One click fault information collection | |||
Cable detection | |||
DNS | Domain Name System | ||
NTP | Network Time Protocol, For IPv4 and IPv6 | ||
Support domain name configuration | |||
Configuration Import /Export | FTP/TFTP based remote configuration import and export | ||
sFlow | Sampled flow | ||
SNMP | Version SNMPV2C/V3 | ||
MQTT | Message Queuing Telemetry Transport | ||
RMON | Support RMON (Remote Monitoring) alarm | ||
Dual partition management | Support dual partition switching | ||
Application Protocol Functions | |||
Telnet server | Support telnet server for IPv4 and IPv6 | ||
Telnet client | Support telnet client for IPv4 and IPv6 | ||
SCP (Secure Copy Protocol) | SCP client/server for IPv4 and IPv6 | ||
SFTP | sftp client/server for IPv4 and IPv6 | ||
SSH server | Support login based on user password-SSH2, support IPv4, IPv6 | ||
Support public key-based login | |||
TACACS | Support TACACS (the terminal access controller accesses the control system) | ||
TFTP | Support TFTP Client | ||
Layer 3 features | |||
Static Route | Support VLAN interface and route port | ||
IPv4 static routing table entry configuration | |||
ARP dynamic learning and static configuration | |||
IPv6 static routing table entry configuration | |||
Neighbor discovery and static configuration | |||
Routing prefix table size 4k for IPv4, for IPv6 divide by 4 | |||
DHCPv4 Client | Dynamic host configuration protocol for IPv4 | ||
DHCPv6 Client | Dynamic host configuration protocol for IPv6 | ||
DHCPv4 Relay | DHCP Relay for IPv4 | ||
DHCPv4 Server | DHCP Server for IPv4 | ||
Switching features | |||
Switching capacity | 26Gbps | ||
Packet forwarding rate | 38.6Mpps | ||
MAC address table | 16K | ||
VLAN | 4K | ||
Buffer | 12Mbit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDI/MDIX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Case protection | IP40 | ||
Installation method | Din-rail | ||
Dimension(W*D*H)mm | 54*115*158mm | ||
Weight | 1.25 kg | ||
Operating environment | |||
Operating temperature | -40℃~+75℃ | ||
Storage/transportation temperature | -40℃~+85℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Industrial Standard | |||
EMS | Surge protection of power: IEC 61000-4-5 6KV/4KV(8/20us) | ||
Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) | |||
RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m | |||
EFT:IEC 61000-4-4 4K/2K | |||
CS:IEC 61000-4-6 10V | |||
ESD:IEC 61000-4-2 Contact: 8K;Air: 15K | |||
EMI | FCC Part 15B Class A | ||
Shock | IEC 60068-2-27 | ||
Free fall | IEC 60068-2-32 | ||
Vibration | IEC 60068-2-6 | ||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | >200,000 hours | ||
Warranty | 5 years | ||
Model | Description |
LT-IS6310G-2GX8GT | L2+ Managed industrial Ethernet switch with 8*10/100/1000Base-T RJ45 ports, 2*1G/2.5GBase-X SFP slots, DC12-58V input, redundant dual power supply; Din-rail installation. Operation temperature: -40℃~+75℃ |

Copy product links
Long by picture save/share

Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch