Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
LT-IS6010GP-2GX8GT-4BT
The SmartByte LT-IS6010GP-2GX8GT-4BT is the highly reliable industrial PoE switch with 8-port 10/100/1000-T PoE and 2-port 1000Base-X SFP slots. It complies with IEEE802.3af, IEEE802.3at and IEEE802.3bt standard PoE protocol, the Max power consumption can reach 90W per port (1-4 ports), which are the idea solution for those higher power consumption industrial networking PDs. Moreover, it is also featuring with port isolation, 250m long distance transmission mode (1-4 ports), QoS(1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel
LT-IS6010GP-2GX8GT-4BT is a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 44-57VDC, redundant power design with polarity reverse/over-current protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and crucial
➢ 8*10/100/1000Base-T RJ45 PoE ports, 2*1000Base-X SFP slots
➢ DC 44-57V input, redundant power supply with polarity reverse/over-current protection
➢ Support one channel output relay alarm(terminal block Pin 5/6) for DC power failure
➢ Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
➢ Support powerful Dip switch function:
1. Port isolation; 2. 250m long distance (1-4 ports); 3. QoS (1-2 ports); 4. PoE watchdog
➢ Support 10K Bytes Jumbo frame
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS6010GP-2GX8GT-4BT | |
Interface | Fiber ports | Copper RJ45 ports |
2 | 8 | |
Ethernet | 8*10/100/1000Base-T PoE, 1-4 ports PoE++ 2*1000Base-X SFP | |
Alarm port | One relay output for power failure. Alarm relay current carry ability: 1A@24VDC | |
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3af IEEE 802.3at IEEE 802.3bt | |
Dip Switch | 1. Port isolation 2. 250m long distance mode (1-4 ports) 3. QoS(1-2 ports） 4. PoE watchdog | |
LED Indicators | ||
P(Power indicator) Green | Off: the device is power off or failed | |
On: the device power on is normal | ||
S (PoE usage indicator) Red | Off: total PoE usage ＜rated 50% | |
Blinking: rated 50%＜total PoE usage＜rated 90% | ||
Normal on: total PoE usage≥ rated 90% | ||
1-4 (Copper ports) | Green indicators | Yellow indicators |
Off: ports link down | Off: PoE not working | |
On: ports link up | On: PoE working | |
Blinking: data on TX/RX | Blinking: PoE working on bt state | |
5-6 (Fiber ports) Green | Off: ports link down | |
On: ports link up | ||
Blinking: data on TX/RX | ||
Power parameters | ||
Input voltage | 44-57VDC (802.3af) 52-57VDC (802.3at/802.3bt) redundant power input | |
Input current | 5.7A Max | |
Total power consumption | Full loading without PoE ≤8W PoE power budget ≤240W | |
Connector | Removable 6-pin terminal block | |
Reverse polarity protection | Support | |
Over-current protection | Support | |
Switching features | ||
Switching capacity | 20G | |
Packet forwarding rate | 29.7 Mpps | |
MAC address table | 16K | |
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | |
Buffer | 2M | |
Forwarding delay | <5us | |
Jumbo Frame | Support 10Kbytes | |
MDI/MDIX | Support | |
Watchdog | Support | |
Network Topology | ||
Star topology | Support | |
Bus topology | Support | |
Tree Topology | Support | |
Mechanical structure | ||
Case protection | IP40 | |
Installation method | Din-rail | |
Dimension(W*D*H)mm | 54*98*130mm | |
Weight | 0.90 kg | |
Operating environment | ||
Operating temperature | -40℃~+75℃ | |
Storage/transportation temperature | -40℃~+85℃ | |
Relative humidity | 5%~95%（non-condensing） | |
Industry standard | EMI：FCC Part 15B Class A | |
Surge protection of power: IEC 61000-4-5 6KV/4KV（8/20us） | ||
Surge protection of Ethernet ports：IEC 61000-4-5 6KV/2KV（10/700us） | ||
RS: IEC 61000-4-3 80 MHz-1 GHz：10 V/m | ||
EFT: IEC 61000-4-4 power interface: 4K；Ethernet ports: 2K | ||
CS: IEC 61000-4-6 10V | ||
ESD: IEC 61000-4-2 Level 4（8K/15K） | ||
Shock: IEC 60068-2-27 | ||
Free fall: IEC 60068-2-32 | ||
Vibration: IEC 60068-2-6 | ||
Certification | CCC/CE/FCC/RoHS/UKCA/Reach | |
MTBF | ＞200,000 hours | |
Warranty | 5 years | |
Model | Description |
LT-IS6010GP-2GX8GT-4BT | Industrial PoE switch with 8*10/100/1000Base-T RJ45 PoE ports and 2*1000Base-X SFP slots, complies with IEEE802.3af, IEEE802.3at and IEEE802.3bt standard, DC44-57V input, redundant dual power supply; Din-rail installation. Operation temperature: -40℃～+75℃ |
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
LT-IS6010GP-2GX8GT-4BT
The SmartByte LT-IS6010GP-2GX8GT-4BT is the highly reliable industrial PoE switch with 8-port 10/100/1000-T PoE and 2-port 1000Base-X SFP slots. It complies with IEEE802.3af, IEEE802.3at and IEEE802.3bt standard PoE protocol, the Max power consumption can reach 90W per port (1-4 ports), which are the idea solution for those higher power consumption industrial networking PDs. Moreover, it is also featuring with port isolation, 250m long distance transmission mode (1-4 ports), QoS(1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel
LT-IS6010GP-2GX8GT-4BT is a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 44-57VDC, redundant power design with polarity reverse/over-current protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and crucial
➢ 8*10/100/1000Base-T RJ45 PoE ports, 2*1000Base-X SFP slots
➢ DC 44-57V input, redundant power supply with polarity reverse/over-current protection
➢ Support one channel output relay alarm(terminal block Pin 5/6) for DC power failure
➢ Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
➢ Support powerful Dip switch function:
1. Port isolation; 2. 250m long distance (1-4 ports); 3. QoS (1-2 ports); 4. PoE watchdog
➢ Support 10K Bytes Jumbo frame
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS6010GP-2GX8GT-4BT | |
Interface | Fiber ports | Copper RJ45 ports |
2 | 8 | |
Ethernet | 8*10/100/1000Base-T PoE, 1-4 ports PoE++ 2*1000Base-X SFP | |
Alarm port | One relay output for power failure. Alarm relay current carry ability: 1A@24VDC | |
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3af IEEE 802.3at IEEE 802.3bt | |
Dip Switch | 1. Port isolation 2. 250m long distance mode (1-4 ports) 3. QoS(1-2 ports） 4. PoE watchdog | |
LED Indicators | ||
P(Power indicator) Green | Off: the device is power off or failed | |
On: the device power on is normal | ||
S (PoE usage indicator) Red | Off: total PoE usage ＜rated 50% | |
Blinking: rated 50%＜total PoE usage＜rated 90% | ||
Normal on: total PoE usage≥ rated 90% | ||
1-4 (Copper ports) | Green indicators | Yellow indicators |
Off: ports link down | Off: PoE not working | |
On: ports link up | On: PoE working | |
Blinking: data on TX/RX | Blinking: PoE working on bt state | |
5-6 (Fiber ports) Green | Off: ports link down | |
On: ports link up | ||
Blinking: data on TX/RX | ||
Power parameters | ||
Input voltage | 44-57VDC (802.3af) 52-57VDC (802.3at/802.3bt) redundant power input | |
Input current | 5.7A Max | |
Total power consumption | Full loading without PoE ≤8W PoE power budget ≤240W | |
Connector | Removable 6-pin terminal block | |
Reverse polarity protection | Support | |
Over-current protection | Support | |
Switching features | ||
Switching capacity | 20G | |
Packet forwarding rate | 29.7 Mpps | |
MAC address table | 16K | |
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | |
Buffer | 2M | |
Forwarding delay | <5us | |
Jumbo Frame | Support 10Kbytes | |
MDI/MDIX | Support | |
Watchdog | Support | |
Network Topology | ||
Star topology | Support | |
Bus topology | Support | |
Tree Topology | Support | |
Mechanical structure | ||
Case protection | IP40 | |
Installation method | Din-rail | |
Dimension(W*D*H)mm | 54*98*130mm | |
Weight | 0.90 kg | |
Operating environment | ||
Operating temperature | -40℃~+75℃ | |
Storage/transportation temperature | -40℃~+85℃ | |
Relative humidity | 5%~95%（non-condensing） | |
Industry standard | EMI：FCC Part 15B Class A | |
Surge protection of power: IEC 61000-4-5 6KV/4KV（8/20us） | ||
Surge protection of Ethernet ports：IEC 61000-4-5 6KV/2KV（10/700us） | ||
RS: IEC 61000-4-3 80 MHz-1 GHz：10 V/m | ||
EFT: IEC 61000-4-4 power interface: 4K；Ethernet ports: 2K | ||
CS: IEC 61000-4-6 10V | ||
ESD: IEC 61000-4-2 Level 4（8K/15K） | ||
Shock: IEC 60068-2-27 | ||
Free fall: IEC 60068-2-32 | ||
Vibration: IEC 60068-2-6 | ||
Certification | CCC/CE/FCC/RoHS/UKCA/Reach | |
MTBF | ＞200,000 hours | |
Warranty | 5 years | |
Model | Description |
LT-IS6010GP-2GX8GT-4BT | Industrial PoE switch with 8*10/100/1000Base-T RJ45 PoE ports and 2*1000Base-X SFP slots, complies with IEEE802.3af, IEEE802.3at and IEEE802.3bt standard, DC44-57V input, redundant dual power supply; Din-rail installation. Operation temperature: -40℃～+75℃ |
Copy product links
Long by picture save/share
LT-IS6010GP-2GX8GT-4BT
The SmartByte LT-IS6010GP-2GX8GT-4BT is the highly reliable industrial PoE switch with 8-port 10/100/1000-T PoE and 2-port 1000Base-X SFP slots. It complies with IEEE802.3af, IEEE802.3at and IEEE802.3bt standard PoE protocol, the Max power consumption can reach 90W per port (1-4 ports), which are the idea solution for those higher power consumption industrial networking PDs. Moreover, it is also featuring with port isolation, 250m long distance transmission mode (1-4 ports), QoS(1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel
LT-IS6010GP-2GX8GT-4BT is a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 44-57VDC, redundant power design with polarity reverse/over-current protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and crucial
➢ 8*10/100/1000Base-T RJ45 PoE ports, 2*1000Base-X SFP slots
➢ DC 44-57V input, redundant power supply with polarity reverse/over-current protection
➢ Support one channel output relay alarm(terminal block Pin 5/6) for DC power failure
➢ Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
➢ Support powerful Dip switch function:
1. Port isolation; 2. 250m long distance (1-4 ports); 3. QoS (1-2 ports); 4. PoE watchdog
➢ Support 10K Bytes Jumbo frame
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS6010GP-2GX8GT-4BT | |
Interface | Fiber ports | Copper RJ45 ports |
2 | 8 | |
Ethernet | 8*10/100/1000Base-T PoE, 1-4 ports PoE++ 2*1000Base-X SFP | |
Alarm port | One relay output for power failure. Alarm relay current carry ability: 1A@24VDC | |
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3af IEEE 802.3at IEEE 802.3bt | |
Dip Switch | 1. Port isolation 2. 250m long distance mode (1-4 ports) 3. QoS(1-2 ports） 4. PoE watchdog | |
LED Indicators | ||
P(Power indicator) Green | Off: the device is power off or failed | |
On: the device power on is normal | ||
S (PoE usage indicator) Red | Off: total PoE usage ＜rated 50% | |
Blinking: rated 50%＜total PoE usage＜rated 90% | ||
Normal on: total PoE usage≥ rated 90% | ||
1-4 (Copper ports) | Green indicators | Yellow indicators |
Off: ports link down | Off: PoE not working | |
On: ports link up | On: PoE working | |
Blinking: data on TX/RX | Blinking: PoE working on bt state | |
5-6 (Fiber ports) Green | Off: ports link down | |
On: ports link up | ||
Blinking: data on TX/RX | ||
Power parameters | ||
Input voltage | 44-57VDC (802.3af) 52-57VDC (802.3at/802.3bt) redundant power input | |
Input current | 5.7A Max | |
Total power consumption | Full loading without PoE ≤8W PoE power budget ≤240W | |
Connector | Removable 6-pin terminal block | |
Reverse polarity protection | Support | |
Over-current protection | Support | |
Switching features | ||
Switching capacity | 20G | |
Packet forwarding rate | 29.7 Mpps | |
MAC address table | 16K | |
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | |
Buffer | 2M | |
Forwarding delay | <5us | |
Jumbo Frame | Support 10Kbytes | |
MDI/MDIX | Support | |
Watchdog | Support | |
Network Topology | ||
Star topology | Support | |
Bus topology | Support | |
Tree Topology | Support | |
Mechanical structure | ||
Case protection | IP40 | |
Installation method | Din-rail | |
Dimension(W*D*H)mm | 54*98*130mm | |
Weight | 0.90 kg | |
Operating environment | ||
Operating temperature | -40℃~+75℃ | |
Storage/transportation temperature | -40℃~+85℃ | |
Relative humidity | 5%~95%（non-condensing） | |
Industry standard | EMI：FCC Part 15B Class A | |
Surge protection of power: IEC 61000-4-5 6KV/4KV（8/20us） | ||
Surge protection of Ethernet ports：IEC 61000-4-5 6KV/2KV（10/700us） | ||
RS: IEC 61000-4-3 80 MHz-1 GHz：10 V/m | ||
EFT: IEC 61000-4-4 power interface: 4K；Ethernet ports: 2K | ||
CS: IEC 61000-4-6 10V | ||
ESD: IEC 61000-4-2 Level 4（8K/15K） | ||
Shock: IEC 60068-2-27 | ||
Free fall: IEC 60068-2-32 | ||
Vibration: IEC 60068-2-6 | ||
Certification | CCC/CE/FCC/RoHS/UKCA/Reach | |
MTBF | ＞200,000 hours | |
Warranty | 5 years | |
Model | Description |
LT-IS6010GP-2GX8GT-4BT | Industrial PoE switch with 8*10/100/1000Base-T RJ45 PoE ports and 2*1000Base-X SFP slots, complies with IEEE802.3af, IEEE802.3at and IEEE802.3bt standard, DC44-57V input, redundant dual power supply; Din-rail installation. Operation temperature: -40℃～+75℃ |
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
Landline
+86-755-28687362
Whatsapp/Teams/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
Managed Industrial Ethernet Switch
Managed Industrial PoE Switch
Managed Industrial PoE++ Switch
Managed Industrial Boost PoE Switch
Managed Industrial Fiber Bypass Switch
Unmanaged Industrial Ethernet Switch
Unmanaged Industrial PoE/PoE++ Switch
Industrial Media Converter
Industrial PoE Media Converter
Industrial Boost Power Supply
Landline
+86-755-28687362
Whatsapp/Skype/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
SmartByte Manufacturing Facility
Add：7-8th floor, 1st building, Lihe Youke Innovation Base, Zhenlong town, Huiyang district, Huizhou city
SmartByte R & D Center
Add: 2nd building, Huajian Edifice, Technology East Road, Haixi Technology Park, Fuzhou City
Copyright © 2026 SMARTBYTE. All Rights Reserved
