Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
LT-IMC30G-1GX2GT-E Series
The SmartByte LT-IMC30G-1GX2GT-E series are unmanaged compact industrial grade media converter with 2-port 10/100/1000-T RJ45 and 1-port 100/1000Base-X fiber optical interface. They are featuring with port isolation, flow control, broadcast storm restrain and fiber port 100/1000M selection function, which all can be configured by the Dip switch on the top panel.
LT-IMC30G-1GX2GT-E series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, such as wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 compact fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability and so on. They are the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications
➢ 2*10/100/1000Base-T RJ45 ports, 1*100/1000Base-X SFP(/SC/ST/FC optional) fiber port
➢ DC 12~58V input, redundant power supply with polarity reverse protection
➢ Powerful Dip switch function:
1.Port isolation; 2.Flow control; 3.Broadcast storm restrain; 4.Fiber port 100/1000M selection
➢ Support 10K Bytes Jumbo frame and 1M large buffer
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design with compact size (30*85*85mm)
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IMC30G-1GX2GT-E | ||||
Interface | Fiber port | Copper RJ45 ports | |||
1 | 2 | ||||
Ethernet | 2*10/100/1000Base-T RJ45 1*100/1000Base-X SFP (SC/ST/FC optional) | ||||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet | ||||
Dip Switch | 1. Port Isolation 2. Flow control 3. Broadcast storm restrain 4. Fiber port 100/1000M selection | ||||
LED Indicators | P(Power indicator) Green | Off: the device is power off or failed | |||
On: the device power on is normal | |||||
S(System indicator) Red | Off: the chip is normal | ||||
On: the chip read/write is unnormal | |||||
1-2 (Copper ports) | Green indicators | Yellow indicators | |||
Off: ports link down | Off: port speed is 10/100M | ||||
On: ports link up | On: port speed is 1000M | ||||
Blinking: data on TX/RX | |||||
3 ( Fiber port) Green | Off: ports link down | ||||
On: ports link up | |||||
Blinking: data on TX/RX | |||||
Power parameters | |||||
Input voltage | 12-58VDC, redundant power input | ||||
Input current | 0.2A Max | ||||
Total power consumption | Full loading ≤2.5W | ||||
Connector | Removable 4-pin terminal block | ||||
Support | |||||
Switching features | |||||
Switching capacity | 6G | ||||
Packet forwarding rate | 8.92 Mpps | ||||
MAC address table | 8K | ||||
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | ||||
Buffer | 1M | ||||
Forwarding delay | <5us | ||||
Jumbo Frame | Support 10Kbytes | ||||
MDI/MDIX | Support | ||||
Watchdog | Support | ||||
Mechanical structure | |||||
Case protection | IP40 | ||||
Installation method | Din-rail | ||||
Dimension(W*D*H) mm | 30*85*85mm | ||||
Weight | 0.21 kg | ||||
Operating environment | |||||
Operating temperature | -40℃~+75℃ | ||||
Storage/transportation temperature | -40℃~+85℃ | ||||
Relative humidity | 5%~95%（non-condensing） | ||||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | ||||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | |||||
DIP: IEC 61000-4-11 Level 3（10V） | |||||
ESD: IEC 61000-4-2 Level 4（8K/15K） | |||||
Shock：IEC 60068-2-27 | |||||
Free fall：IEC 60068-2-32 | |||||
Vibration：IEC 60068-2-6 | |||||
Certification | CCC/CE/FCC/RoHS/UKCA | ||||
MTBF | ＞200,000 hours | ||||
Warranty | 5 years | ||||
Description | |
LT-IMC30G-1GX2GT-E | 10/100/1000Base-T to 1000Base-X unmanaged compact industrial media converter with 2*10/100/1000Base-T RJ45 ports and 1*100/1000Base-X SFP slot, DC12-58V input, redundant dual power supply, Din-rail installation. Operation temperature: -40℃～+75℃ |
LT-IMC30G-1GX2GT-SC/ST/FC-E | 10/100/1000Base-T to 1000Base-X unmanaged compact industrial media converter with 2*10/100/1000Base-T RJ45 ports and 1*100/1000Base-X SC port(ST and FC are optional), DC12-58V input, redundant dual power supply, Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40℃～+75℃ |
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
LT-IMC30G-1GX2GT-E Series
The SmartByte LT-IMC30G-1GX2GT-E series are unmanaged compact industrial grade media converter with 2-port 10/100/1000-T RJ45 and 1-port 100/1000Base-X fiber optical interface. They are featuring with port isolation, flow control, broadcast storm restrain and fiber port 100/1000M selection function, which all can be configured by the Dip switch on the top panel.
LT-IMC30G-1GX2GT-E series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, such as wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 compact fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability and so on. They are the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications
➢ 2*10/100/1000Base-T RJ45 ports, 1*100/1000Base-X SFP(/SC/ST/FC optional) fiber port
➢ DC 12~58V input, redundant power supply with polarity reverse protection
➢ Powerful Dip switch function:
1.Port isolation; 2.Flow control; 3.Broadcast storm restrain; 4.Fiber port 100/1000M selection
➢ Support 10K Bytes Jumbo frame and 1M large buffer
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design with compact size (30*85*85mm)
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IMC30G-1GX2GT-E | ||||
Interface | Fiber port | Copper RJ45 ports | |||
1 | 2 | ||||
Ethernet | 2*10/100/1000Base-T RJ45 1*100/1000Base-X SFP (SC/ST/FC optional) | ||||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet | ||||
Dip Switch | 1. Port Isolation 2. Flow control 3. Broadcast storm restrain 4. Fiber port 100/1000M selection | ||||
LED Indicators | P(Power indicator) Green | Off: the device is power off or failed | |||
On: the device power on is normal | |||||
S(System indicator) Red | Off: the chip is normal | ||||
On: the chip read/write is unnormal | |||||
1-2 (Copper ports) | Green indicators | Yellow indicators | |||
Off: ports link down | Off: port speed is 10/100M | ||||
On: ports link up | On: port speed is 1000M | ||||
Blinking: data on TX/RX | |||||
3 ( Fiber port) Green | Off: ports link down | ||||
On: ports link up | |||||
Blinking: data on TX/RX | |||||
Power parameters | |||||
Input voltage | 12-58VDC, redundant power input | ||||
Input current | 0.2A Max | ||||
Total power consumption | Full loading ≤2.5W | ||||
Connector | Removable 4-pin terminal block | ||||
Support | |||||
Switching features | |||||
Switching capacity | 6G | ||||
Packet forwarding rate | 8.92 Mpps | ||||
MAC address table | 8K | ||||
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | ||||
Buffer | 1M | ||||
Forwarding delay | <5us | ||||
Jumbo Frame | Support 10Kbytes | ||||
MDI/MDIX | Support | ||||
Watchdog | Support | ||||
Mechanical structure | |||||
Case protection | IP40 | ||||
Installation method | Din-rail | ||||
Dimension(W*D*H) mm | 30*85*85mm | ||||
Weight | 0.21 kg | ||||
Operating environment | |||||
Operating temperature | -40℃~+75℃ | ||||
Storage/transportation temperature | -40℃~+85℃ | ||||
Relative humidity | 5%~95%（non-condensing） | ||||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | ||||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | |||||
DIP: IEC 61000-4-11 Level 3（10V） | |||||
ESD: IEC 61000-4-2 Level 4（8K/15K） | |||||
Shock：IEC 60068-2-27 | |||||
Free fall：IEC 60068-2-32 | |||||
Vibration：IEC 60068-2-6 | |||||
Certification | CCC/CE/FCC/RoHS/UKCA | ||||
MTBF | ＞200,000 hours | ||||
Warranty | 5 years | ||||
Description | |
LT-IMC30G-1GX2GT-E | 10/100/1000Base-T to 1000Base-X unmanaged compact industrial media converter with 2*10/100/1000Base-T RJ45 ports and 1*100/1000Base-X SFP slot, DC12-58V input, redundant dual power supply, Din-rail installation. Operation temperature: -40℃～+75℃ |
LT-IMC30G-1GX2GT-SC/ST/FC-E | 10/100/1000Base-T to 1000Base-X unmanaged compact industrial media converter with 2*10/100/1000Base-T RJ45 ports and 1*100/1000Base-X SC port(ST and FC are optional), DC12-58V input, redundant dual power supply, Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40℃～+75℃ |
Copy product links
Long by picture save/share
LT-IMC30G-1GX2GT-E Series
The SmartByte LT-IMC30G-1GX2GT-E series are unmanaged compact industrial grade media converter with 2-port 10/100/1000-T RJ45 and 1-port 100/1000Base-X fiber optical interface. They are featuring with port isolation, flow control, broadcast storm restrain and fiber port 100/1000M selection function, which all can be configured by the Dip switch on the top panel.
LT-IMC30G-1GX2GT-E series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, such as wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 compact fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability and so on. They are the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications
➢ 2*10/100/1000Base-T RJ45 ports, 1*100/1000Base-X SFP(/SC/ST/FC optional) fiber port
➢ DC 12~58V input, redundant power supply with polarity reverse protection
➢ Powerful Dip switch function:
1.Port isolation; 2.Flow control; 3.Broadcast storm restrain; 4.Fiber port 100/1000M selection
➢ Support 10K Bytes Jumbo frame and 1M large buffer
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design with compact size (30*85*85mm)
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IMC30G-1GX2GT-E | ||||
Interface | Fiber port | Copper RJ45 ports | |||
1 | 2 | ||||
Ethernet | 2*10/100/1000Base-T RJ45 1*100/1000Base-X SFP (SC/ST/FC optional) | ||||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet | ||||
Dip Switch | 1. Port Isolation 2. Flow control 3. Broadcast storm restrain 4. Fiber port 100/1000M selection | ||||
LED Indicators | P(Power indicator) Green | Off: the device is power off or failed | |||
On: the device power on is normal | |||||
S(System indicator) Red | Off: the chip is normal | ||||
On: the chip read/write is unnormal | |||||
1-2 (Copper ports) | Green indicators | Yellow indicators | |||
Off: ports link down | Off: port speed is 10/100M | ||||
On: ports link up | On: port speed is 1000M | ||||
Blinking: data on TX/RX | |||||
3 ( Fiber port) Green | Off: ports link down | ||||
On: ports link up | |||||
Blinking: data on TX/RX | |||||
Power parameters | |||||
Input voltage | 12-58VDC, redundant power input | ||||
Input current | 0.2A Max | ||||
Total power consumption | Full loading ≤2.5W | ||||
Connector | Removable 4-pin terminal block | ||||
Support | |||||
Switching features | |||||
Switching capacity | 6G | ||||
Packet forwarding rate | 8.92 Mpps | ||||
MAC address table | 8K | ||||
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | ||||
Buffer | 1M | ||||
Forwarding delay | <5us | ||||
Jumbo Frame | Support 10Kbytes | ||||
MDI/MDIX | Support | ||||
Watchdog | Support | ||||
Mechanical structure | |||||
Case protection | IP40 | ||||
Installation method | Din-rail | ||||
Dimension(W*D*H) mm | 30*85*85mm | ||||
Weight | 0.21 kg | ||||
Operating environment | |||||
Operating temperature | -40℃~+75℃ | ||||
Storage/transportation temperature | -40℃~+85℃ | ||||
Relative humidity | 5%~95%（non-condensing） | ||||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | ||||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | |||||
DIP: IEC 61000-4-11 Level 3（10V） | |||||
ESD: IEC 61000-4-2 Level 4（8K/15K） | |||||
Shock：IEC 60068-2-27 | |||||
Free fall：IEC 60068-2-32 | |||||
Vibration：IEC 60068-2-6 | |||||
Certification | CCC/CE/FCC/RoHS/UKCA | ||||
MTBF | ＞200,000 hours | ||||
Warranty | 5 years | ||||
Description | |
LT-IMC30G-1GX2GT-E | 10/100/1000Base-T to 1000Base-X unmanaged compact industrial media converter with 2*10/100/1000Base-T RJ45 ports and 1*100/1000Base-X SFP slot, DC12-58V input, redundant dual power supply, Din-rail installation. Operation temperature: -40℃～+75℃ |
LT-IMC30G-1GX2GT-SC/ST/FC-E | 10/100/1000Base-T to 1000Base-X unmanaged compact industrial media converter with 2*10/100/1000Base-T RJ45 ports and 1*100/1000Base-X SC port(ST and FC are optional), DC12-58V input, redundant dual power supply, Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40℃～+75℃ |
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
Landline
+86-755-28687362
Whatsapp/Teams/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
Managed Industrial Ethernet Switch
Managed Industrial PoE Switch
Managed Industrial PoE++ Switch
Managed Industrial Boost PoE Switch
Managed Industrial Fiber Bypass Switch
Unmanaged Industrial Ethernet Switch
Unmanaged Industrial PoE/PoE++ Switch
Industrial Media Converter
Industrial PoE Media Converter
Industrial Boost Power Supply
Landline
+86-755-28687362
Whatsapp/Skype/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
SmartByte Manufacturing Facility
Add：7-8th floor, 1st building, Lihe Youke Innovation Base, Zhenlong town, Huiyang district, Huizhou city
SmartByte R & D Center
Add: 2nd building, Huajian Edifice, Technology East Road, Haixi Technology Park, Fuzhou City
Copyright © 2026 SMARTBYTE. All Rights Reserved
