Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
LT-IMC30F-1FX2TX-E Series
The SmartByte LT-IMC30F-1FX2TX-E series are unmanaged compact industrial grade media converter with 2-port 10/100Base-TX RJ45 and 1-port 100Base-FX fiber optical interface. They are featuring with port isolation, flow control, broadcast storm restrain and 10K Bytes Jumbo frame function, which all can be configured by the Dip switch on the top panel.
LT-IMC30F-1FX2TX-E series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, such as wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 fan-less compact housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability and so on. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications
➢ 2*10/100Base-TX RJ45 ports, 1*100Base-FX SFP(SC/ST/FC optional) fiber port
➢ DC 12~58V input, redundant power supply with polarity reverse protection
➢ Powerful Dip switch function:
1.Port isolation; 2.Flow control; 3.Broadcast storm restrain 4.10K Bytes Jumbo frame
➢ Support 1M large buffer
➢ Support watchdog, it can reboot if the device is frozen
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design with compact size (30*85*85mm)
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IMC30F-1FX2TX-E | |||
Interface | Fiber port | Copper RJ45 ports | ||
1 | 2 | |||
Ethernet | 2*10/100Base-TX RJ45 1*100Base-FX SFP (SC/ST/FC optional) | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet | |||
Dip Switch | 1. Port Isolation 2. Flow control 3. Broadcast storm restrain 4. 10K Bytes Jumbo frame | |||
LED Indicators | P(Power indicator) Green | Off: the device is power off or failed | ||
On: the device power on is normal | ||||
S(System indicator) Red | Off: the chip is normal | |||
On: the chip read/write is unnormal | ||||
1-2 (Copper ports) | Green indicators | Yellow indicators | ||
Off: ports link down | Off: port speed is 10M | |||
On: ports link up | On: port speed is 100M | |||
Blinking: data on TX/RX | ||||
3 ( Fiber port) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
Power parameters | ||||
Input voltage | 12-58VDC, redundant power input | |||
Input current | 0.2A Max | |||
Total power consumption | Full loading ≤2.5W | |||
Connector | Removable 4-pin terminal block | |||
Switching features | ||||
Switching capacity | 0.6G | |||
Packet forwarding rate | 0.89 Mpps | |||
MAC address table | 8K | |||
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | |||
Buffer | 1M | |||
Forwarding delay | <10us | |||
Jumbo Frame | Support 10Kbytes | |||
MDI/MDIX | Support | |||
Watchdog | Support | |||
Mechanical structure | ||||
Case protection | IP40 | |||
Installation method | Din-rail | |||
Dimension(W*D*H) mm | 30*85*85mm | |||
Weight | 0.21 kg | |||
Operating environment | ||||
Operating temperature | -40℃~+75℃ | |||
Storage/transportation temperature | -40℃~+85℃ | |||
Relative humidity | 5%~95%（non-condensing） | |||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | |||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | ||||
DIP: IEC 61000-4-11 Level 3（10V） | ||||
ESD: IEC 61000-4-2 Level 4（8K/15K） | ||||
Shock：IEC 60068-2-27 | ||||
Free fall：IEC 60068-2-32 | ||||
Vibration：IEC 60068-2-6 | ||||
Certification | CCC/CE/FCC/RoHS/UKCA | |||
MTBF | ＞200,000 hours | |||
Warranty | 5 years | |||
Description | |
LT-IMC30F-1FX2TX-E | 10/100Base-TX to 100Base-FX unmanaged compact industrial media converter with 2*10/100Base-TX RJ45 ports and 1*100Base-FX SFP slot, DC12-58V input, redundant dual power supply, Din-rail installation. Operation temperature: -40℃～+75℃ |
LT-IMC30F-1FX2TX-SC/ST/FC-E | 10/100Base-TX to 100Base-FX unmanaged compact industrial media converter with 2*10/100Base-TX RJ45 ports and 1*100Base-FX SC port (ST and FC are optional), DC12-58V input, redundant dual power supply; Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 2KM -120KM optional; Operation temperature: -40℃～+75℃ |
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
LT-IMC30F-1FX2TX-E Series
The SmartByte LT-IMC30F-1FX2TX-E series are unmanaged compact industrial grade media converter with 2-port 10/100Base-TX RJ45 and 1-port 100Base-FX fiber optical interface. They are featuring with port isolation, flow control, broadcast storm restrain and 10K Bytes Jumbo frame function, which all can be configured by the Dip switch on the top panel.
LT-IMC30F-1FX2TX-E series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, such as wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 fan-less compact housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability and so on. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications
➢ 2*10/100Base-TX RJ45 ports, 1*100Base-FX SFP(SC/ST/FC optional) fiber port
➢ DC 12~58V input, redundant power supply with polarity reverse protection
➢ Powerful Dip switch function:
1.Port isolation; 2.Flow control; 3.Broadcast storm restrain 4.10K Bytes Jumbo frame
➢ Support 1M large buffer
➢ Support watchdog, it can reboot if the device is frozen
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design with compact size (30*85*85mm)
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IMC30F-1FX2TX-E | |||
Interface | Fiber port | Copper RJ45 ports | ||
1 | 2 | |||
Ethernet | 2*10/100Base-TX RJ45 1*100Base-FX SFP (SC/ST/FC optional) | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet | |||
Dip Switch | 1. Port Isolation 2. Flow control 3. Broadcast storm restrain 4. 10K Bytes Jumbo frame | |||
LED Indicators | P(Power indicator) Green | Off: the device is power off or failed | ||
On: the device power on is normal | ||||
S(System indicator) Red | Off: the chip is normal | |||
On: the chip read/write is unnormal | ||||
1-2 (Copper ports) | Green indicators | Yellow indicators | ||
Off: ports link down | Off: port speed is 10M | |||
On: ports link up | On: port speed is 100M | |||
Blinking: data on TX/RX | ||||
3 ( Fiber port) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
Power parameters | ||||
Input voltage | 12-58VDC, redundant power input | |||
Input current | 0.2A Max | |||
Total power consumption | Full loading ≤2.5W | |||
Connector | Removable 4-pin terminal block | |||
Switching features | ||||
Switching capacity | 0.6G | |||
Packet forwarding rate | 0.89 Mpps | |||
MAC address table | 8K | |||
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | |||
Buffer | 1M | |||
Forwarding delay | <10us | |||
Jumbo Frame | Support 10Kbytes | |||
MDI/MDIX | Support | |||
Watchdog | Support | |||
Mechanical structure | ||||
Case protection | IP40 | |||
Installation method | Din-rail | |||
Dimension(W*D*H) mm | 30*85*85mm | |||
Weight | 0.21 kg | |||
Operating environment | ||||
Operating temperature | -40℃~+75℃ | |||
Storage/transportation temperature | -40℃~+85℃ | |||
Relative humidity | 5%~95%（non-condensing） | |||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | |||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | ||||
DIP: IEC 61000-4-11 Level 3（10V） | ||||
ESD: IEC 61000-4-2 Level 4（8K/15K） | ||||
Shock：IEC 60068-2-27 | ||||
Free fall：IEC 60068-2-32 | ||||
Vibration：IEC 60068-2-6 | ||||
Certification | CCC/CE/FCC/RoHS/UKCA | |||
MTBF | ＞200,000 hours | |||
Warranty | 5 years | |||
Description | |
LT-IMC30F-1FX2TX-E | 10/100Base-TX to 100Base-FX unmanaged compact industrial media converter with 2*10/100Base-TX RJ45 ports and 1*100Base-FX SFP slot, DC12-58V input, redundant dual power supply, Din-rail installation. Operation temperature: -40℃～+75℃ |
LT-IMC30F-1FX2TX-SC/ST/FC-E | 10/100Base-TX to 100Base-FX unmanaged compact industrial media converter with 2*10/100Base-TX RJ45 ports and 1*100Base-FX SC port (ST and FC are optional), DC12-58V input, redundant dual power supply; Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 2KM -120KM optional; Operation temperature: -40℃～+75℃ |
Copy product links
Long by picture save/share
LT-IMC30F-1FX2TX-E Series
The SmartByte LT-IMC30F-1FX2TX-E series are unmanaged compact industrial grade media converter with 2-port 10/100Base-TX RJ45 and 1-port 100Base-FX fiber optical interface. They are featuring with port isolation, flow control, broadcast storm restrain and 10K Bytes Jumbo frame function, which all can be configured by the Dip switch on the top panel.
LT-IMC30F-1FX2TX-E series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, such as wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 fan-less compact housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability and so on. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications
➢ 2*10/100Base-TX RJ45 ports, 1*100Base-FX SFP(SC/ST/FC optional) fiber port
➢ DC 12~58V input, redundant power supply with polarity reverse protection
➢ Powerful Dip switch function:
1.Port isolation; 2.Flow control; 3.Broadcast storm restrain 4.10K Bytes Jumbo frame
➢ Support 1M large buffer
➢ Support watchdog, it can reboot if the device is frozen
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design with compact size (30*85*85mm)
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IMC30F-1FX2TX-E | |||
Interface | Fiber port | Copper RJ45 ports | ||
1 | 2 | |||
Ethernet | 2*10/100Base-TX RJ45 1*100Base-FX SFP (SC/ST/FC optional) | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet | |||
Dip Switch | 1. Port Isolation 2. Flow control 3. Broadcast storm restrain 4. 10K Bytes Jumbo frame | |||
LED Indicators | P(Power indicator) Green | Off: the device is power off or failed | ||
On: the device power on is normal | ||||
S(System indicator) Red | Off: the chip is normal | |||
On: the chip read/write is unnormal | ||||
1-2 (Copper ports) | Green indicators | Yellow indicators | ||
Off: ports link down | Off: port speed is 10M | |||
On: ports link up | On: port speed is 100M | |||
Blinking: data on TX/RX | ||||
3 ( Fiber port) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
Power parameters | ||||
Input voltage | 12-58VDC, redundant power input | |||
Input current | 0.2A Max | |||
Total power consumption | Full loading ≤2.5W | |||
Connector | Removable 4-pin terminal block | |||
Switching features | ||||
Switching capacity | 0.6G | |||
Packet forwarding rate | 0.89 Mpps | |||
MAC address table | 8K | |||
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | |||
Buffer | 1M | |||
Forwarding delay | <10us | |||
Jumbo Frame | Support 10Kbytes | |||
MDI/MDIX | Support | |||
Watchdog | Support | |||
Mechanical structure | ||||
Case protection | IP40 | |||
Installation method | Din-rail | |||
Dimension(W*D*H) mm | 30*85*85mm | |||
Weight | 0.21 kg | |||
Operating environment | ||||
Operating temperature | -40℃~+75℃ | |||
Storage/transportation temperature | -40℃~+85℃ | |||
Relative humidity | 5%~95%（non-condensing） | |||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | |||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | ||||
DIP: IEC 61000-4-11 Level 3（10V） | ||||
ESD: IEC 61000-4-2 Level 4（8K/15K） | ||||
Shock：IEC 60068-2-27 | ||||
Free fall：IEC 60068-2-32 | ||||
Vibration：IEC 60068-2-6 | ||||
Certification | CCC/CE/FCC/RoHS/UKCA | |||
MTBF | ＞200,000 hours | |||
Warranty | 5 years | |||
Description | |
LT-IMC30F-1FX2TX-E | 10/100Base-TX to 100Base-FX unmanaged compact industrial media converter with 2*10/100Base-TX RJ45 ports and 1*100Base-FX SFP slot, DC12-58V input, redundant dual power supply, Din-rail installation. Operation temperature: -40℃～+75℃ |
LT-IMC30F-1FX2TX-SC/ST/FC-E | 10/100Base-TX to 100Base-FX unmanaged compact industrial media converter with 2*10/100Base-TX RJ45 ports and 1*100Base-FX SC port (ST and FC are optional), DC12-58V input, redundant dual power supply; Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 2KM -120KM optional; Operation temperature: -40℃～+75℃ |
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
Landline
+86-755-28687362
Whatsapp/Teams/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
Managed Industrial Ethernet Switch
Managed Industrial PoE Switch
Managed Industrial PoE++ Switch
Managed Industrial Boost PoE Switch
Managed Industrial Fiber Bypass Switch
Unmanaged Industrial Ethernet Switch
Unmanaged Industrial PoE/PoE++ Switch
Industrial Media Converter
Industrial PoE Media Converter
Industrial Boost Power Supply
Landline
+86-755-28687362
Whatsapp/Skype/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
SmartByte Manufacturing Facility
Add：7-8th floor, 1st building, Lihe Youke Innovation Base, Zhenlong town, Huiyang district, Huizhou city
SmartByte R & D Center
Add: 2nd building, Huajian Edifice, Technology East Road, Haixi Technology Park, Fuzhou City
Copyright © 2026 SMARTBYTE. All Rights Reserved
