
Overview
The SmartByte LT-IS6328GP-4GX16GT8GC-U series are the highly reliable Layer 2+ managed industrial PoE switches with 16-port 10/100/1000Base-T PoE ,8-port 1000Base Combo and 4-port 1G/2.5GBase-X SFP. They comply with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. With full gigabit capability, they can provide high performance and the ability to quickly transfer large amounts of video, voice, and data across a network. They support DI/DO/RS485, G.8032 ERPS, MSTP/RSTP/STP redundancy technologies, Layer 3 IPv4/IPv6 static routing features and powerful Layer 2 management and secure function, which all making them ideal for large-scale industrial networks.
LT-IS6328GP-4GX16GT8GC-U series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, including wide range voltage input 44-57VDC, redundant power design with DC/DC, robust IP40 fan-less housing with rack-mount installation, wide operation temperature from -40°C to 75 °C as well as high-level EMI/EMC capability. They are the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
Features
➢ 16*10/100/1000Base-T PoE, 8*1G Combo RJ45/SFP, 4*1G/2.5G Base-X SFP
➢ DC/DC redundant power supply with polarity reverse/over-voltage/over-current protection
➢ Support USB one key configuration and upgrading
➢ DI/DO/RS485 are optional
➢ Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
➢ Layer 2 features: VLAN; ERPS, STP/RSTP/MSTP; Link aggregation, IGMP snooping, port mirroring, QinQ, 802.1X, port isolation, RMON, NTP client, DHCP snooping/client, Ping/Tracert test, ACL, QoS and SFP DDM function
➢ Management and maintenance: IPv4 and IPv6 management; PoE management; Support Web, SNMP, CLI, Telnet/SSH management method; Support user management, system log, configuration upload/download through web interface, firmware upgrade via HTTP/TFTP/USB
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and rack-mount hardware design
➢ Operation temperature: -40 ℃ ~+ 75 ℃
|
Model No. |
LT-IS6328GP-4GX16GT8GC-U/LT-IS6328GP-4GX16GT8GC-U-D |
|||
|
Interface |
1G/2.5G Fiber ports |
10/100/1000M RJ45 |
GigabitCombo |
|
|
4 |
16 |
8 |
||
|
Ethernet |
16*10/100/1000Base-T RJ45 PoE 8*COMBO SFP/RJ45 4*1000/2500Base-X SFP |
|||
|
Management port |
1*RJ45 Console port (115200,8,N,1),1*USB 2.0 for configuration and firmware update |
|||
|
Data & Alarm channel (optional) |
1 channel RS485 1 channel DI(digital input) 1 channel DO(digital output) |
|||
|
Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE802.3af PoE IEEE802.3at PoE+ |
|||
|
LED Indicators |
||||
|
P(Power indicator) |
Off:the device is power off or failed |
On: the device power on is normal |
||
|
S (System status indicator) |
Blinking: device initialization |
On: device on normal operation |
||
|
USB(USB status indicator) Green |
Off: USB flash drive not insert or not detected by device |
|||
|
On: USB flash drive is detected by device |
||||
|
Blinking: the device is reading and writing the data from USB flash drive |
||||
|
ALM (Fault status indicator) Red |
Off: Device on normal working state |
On: Fault alarm |
||
|
1-24 (Copper ports indicators) Green |
Off: ports link down |
|||
|
On: ports link up |
||||
|
Blinking:data on TX/RX |
||||
|
Off: PoE not working |
||||
|
On: PoE working |
||||
|
17-28(Fiber ports indicators) Green |
Off: ports link down |
|||
|
On: ports link up |
||||
|
Blinking: data on TX/RX |
||||
|
Power parameter |
||||
|
Input voltage |
44-57VDC(802.3af) 52-57VDC(802.3at) redundant power input |
|||
|
Input current |
9A DCinput Max |
|||
|
Total power consumption |
Full loadingwithout PoE≤32W PoE power budget≤ 370W |
|||
|
Connector |
Removable2*2-pin terminal block |
|||
|
Reverse polarity protection |
Support |
|||
|
Over-voltage protection |
Support |
|||
|
Over-current protection |
Support |
|||
|
Layer 2 functions |
||||
|
Port aggregation |
Support GE port aggregation Support 2.5GE aggregation Support static aggregation SupportLACPdynamic aggregation Up to 64 aggregation groups and up to 8 ports per group |
|||
|
Port features |
Support IEEE802.3x flow control, Supportinterfacecounters, Support port isolation, Port mirroring ( One-to-One,Many-to-One) Support loop detection(Port-based; VLAN-based) Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast) |
|||
|
Mac-addresstablemanagement |
Support static Mac-addressmanagement Supportdynamic Mac-address Management Supportfiltering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN |
|||
|
VLAN |
Support access mode Support trunk mode Support hybrid mode |
|||
|
Mac Based VLAN IP Based VLAN Protocol Based VLAN |
||||
|
GVRP |
Normal mode Fixed mode Forbidden mode |
|||
|
QinQ |
Port-based QinQ VLAN-based QinQ (VLAN-stacking; VLAN-mapping) Flow-based QinQ |
|||
|
LLDP |
LLDP (Link Layer Discovery Protocol) |
|||
|
Ring network protocol |
Support IEEE802.1D-STP Support IEEE802.1W-RSTP Support IEEE802.1S-MSTP |
|||
|
Support G.8032 ERPS protocol,single ring, sub Ring andmajor ring Recovery time ≤20ms |
||||
|
L2Multicast |
||||
|
IGMP snooping |
Support IGMP snooping |
|||
|
Group address |
Support group address |
|||
|
Securityfunctions |
||||
|
ACL |
IP Standard ACL MAC extend ACL IP extend ACL IPv6 ACL |
|||
|
QoS |
Support QoS Class,remarking Support SP, WRR queue scheduling Ingressport-basedrate-limit Egressport-basedrate-limit Supportpolicy-based QoS |
|||
|
802.1x |
Portaccesscontrol Mac-addressaccesscontrol RADIUSserver |
|||
|
Port-security |
Port-security |
|||
|
IP source guard |
IP Port/MAC binding |
|||
|
ARP-check |
Support ARP-check and ARP packet filtering for illegal users |
|||
|
Access control |
Support Telnet/SSH/HTTP/HTTPS user access control |
|||
|
Management& Maintenance functions |
||||
|
User Management |
Support password protection Support user authorization management |
|||
|
SNMP |
Supporting SNMPV1/V2C/V3 version |
|||
|
Web Management |
Web Management Support HTTP V1.1 Support HTTPS |
|||
|
CLI management |
Console/Telnet command line management |
|||
|
RMON |
Support RMON(Remote Monitoring) alarm |
|||
|
Firmware upgrade |
Firmware upgrade |
|||
|
Fault Detection |
Ping/Tracerout Dying gasp Support optical transceiver DDM function |
|||
|
Cable detection |
Support copper port cable detection |
|||
|
PoE management |
Support 802.3af/802.3at |
|||
|
Support PD watchdog |
||||
|
Support PoE priority management |
||||
|
Support Max PoE power configuration for each port |
||||
|
Support alarm waterline configuration |
||||
|
Support reserved power configuration |
||||
|
NTP |
Network Time Protocol |
|||
|
Syslog/Debug |
Syslog/Debug Syslog send to three servers |
|||
|
Configuration import/export |
Support FTP/TFTP remote import/export Support USB import/export |
|||
|
Dual partition management |
Support dual partition switching |
|||
|
Application Protocol Functions |
||||
|
DHCP Snooping |
DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82 |
|||
|
DHCP client |
Support DHCP client |
|||
|
Telnet server |
Support telnet server |
|||
|
Telnet client |
Support telnet client |
|||
|
SSH server |
Support SSH server |
|||
|
TACACS |
Support TACACS(the terminal access controller accesses the control system) |
|||
|
sflow |
Support network traffic analysis |
|||
|
TFTP |
Support TFTP Client |
|||
|
Layer 3 functions |
||||
|
ARP |
ARP table aging |
|||
|
DHCP server |
||||
|
IPv4 / IPv6 |
static routing |
|||
|
Switching features |
||||
|
Switching capacity |
68Gbps |
|||
|
Packet forwarding rate |
101Mpps |
|||
|
MAC address table |
16K |
|||
|
VLAN |
4K |
|||
|
Buffer |
12Mbit |
|||
|
Forwarding delay |
<5us |
|||
|
Jumbo Frame |
Support 10Kbytes |
|||
|
MDX/MIDX |
Support |
|||
|
Watchdog |
Support |
|||
|
Mechanical structure |
||||
|
Case protection |
IP40 |
|||
|
Installation method |
Rack mountable |
|||
|
Dimension(W*D*H)mm |
440*45*280mm |
|||
|
Weight |
LT-IS6228GP-4GX16GT8GC-U:5.3kg; LT-IS6228GP-4GX16GT8GC-U-D: 5.4kg |
|||
|
Operating environment |
||||
|
Operating temperature |
-40℃~+ 75℃ |
|||
|
Storage/transportation temperature |
-40℃~+ 85℃ |
|||
|
Relative humidity |
Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH |
|||
|
Industrial Standard |
||||
|
EMS |
Surge protection of power: IEC 61000-4-5 6KV/6KV(8/20us) Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m EFT:IEC 61000-4-4 4K/2K CS:IEC 61000-4-6 10V ESD:IEC 61000-4-2 Contact: 8K;Air: 15K |
|||
|
EMI |
FCC Part 15B Class A |
|||
|
Shock |
IEC 60068-2-27 |
|||
|
Free fall |
IEC 60068-2-32 |
|||
|
Vibration |
IEC 60068-2-6 |
|||
|
Certification |
CCC/CE/UKCA/RoHS/REACH/FCC |
|||
|
MTBF |
>200,000 hours |
|||
|
Warranty |
5 years |
|||
|
Model |
Description |
|
LT-IS6328GP-4GX16GT8GC-U
|
L2+ Managed rack-mount industrial PoE switch with4*1000/2500Base-X SFP ports,16*10/100/1000Base-T RJ45 PoE and 8*1GCombo RJ45/SFP ports. DualDC44-57V input; Operation temperature -40°C to75 °C. |
|
LT-IS6328GP-4GX16GT8GC-U-D
|
L2+ Managed rack-mount industrial PoE switch with4*1000/2500Base-X SFP ports,16*10/100/1000Base-T RJ45 PoE and 8*1GCombo RJ45/SFP ports. Support DI/DO and RS485.Dual DC44-57V input; Operation temperature -40°C to75 °C. |