Overview
The SmartByte LT-IS6528XGP-4XS16GT8GC-U-2BT series are the highly reliable Layer 3 managed industrial PoE switch with 16-port 10/100/1000Base-T PoE ,8-port 1000Base Combo and 4-port 1G/2.5G/10GBase-X SFP+. They comply with IEEE802.3af PoE, IEEE802.3at PoE+, IEEE802.3bt PoE++ standard protocol, the Max power output consumption per port can reach 90W (1-2 ports), which are the idea solution for those high power consumption industrial networking PDs. With full gigabit downlink and 10G uplink capability, they can provide high performance and the ability to quickly transfer large amounts of video, voice, and data across a network. They support DI/DO/RS485, G.8032 ERPS, MSTP/RSTP/STP redundancy technologies, Layer 3 static routing & dynamic routing features, powerful Layer 2 management and secure function, which all making them ideal for large-scale industrial networks.
LT-IS6528XGP-4XS16GT8GC-U-2BT series are also the high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, including wide range voltage input 44-57VDC, redundant power design with DC/DC, robust IP40 fan-less housing with rack-mount installation, wide operation temperature from -40°C to 75 °C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
Features
➢ 16*10/100/1000Base-T PoE, 8*1G Combo RJ45/SFP, 4*1G/2.5G/10GBase-X SFP+
➢ DC/DC redundant power supply with polarity reverse/over-voltage/over-current protection
➢ Complies with IEEE802.3af PoE, IEEE802.3at PoE+ and IEEE802.3bt PoE++ standard
➢ Support USB one key configuration and upgrading
➢ DI/DO/RS485 are optional
➢ Layer 3 features: Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP
➢ Layer 2 features: VLAN; ERPS, STP/RSTP/MSTP; Link aggregation, IGMP snooping, port mirroring, QinQ, 802.1X, port isolation, RMON, NTP client, DHCP snooping/client, Ping/Tracert test, ACL, QoS and SFP DDM function
➢ Management and maintenance: IPv4 and IPv6 management, PoE management; Support Web, SNMP, CLI, Telnet/SSH management method; Support user management, system log, configuration upload/download through web interface, firmware upgrade via HTTP/TFTP/USB
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and rack-mount hardware design
➢ Operation temperature: -40 ℃ ~+ 75 ℃
Model No. |
LT-IS6528XGP-4XS16GT8GC-U-2BT/LT-IS6528XGP-4XS16GT8GC-U-D-2BT |
|||
Interface |
1G/2.5G/10G Fiber ports |
10/100/1000M RJ45 |
Gigabit Combo |
|
4 |
16 |
8 |
||
Ethernet |
16*10/100/1000Base-T RJ45 PoE/PoE+ (1-2 ports support PoE++ 90W) 8*1GCOMBO SFP/RJ45 4*1G/2.5G/10GBase-X SFP+ |
|||
Management port |
1*RJ45 Console port,1*USB 2.0 for configuration and firmware update |
|||
Data & Alarm channel(optional) |
1 channel RS485 1 channel DI(digital input) 1 channel DO(digital output) |
|||
Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE802.3af PoE IEEE802.3at PoE+ IEEE 802.3bt PoE++ |
|||
LED Indicators |
||||
P(Power indicator) |
Off:the device is power off or failed |
On: the device power on is normal |
||
S (System status indicator) |
Blinking: device initialization |
On: device on normal operation |
||
USB (USB status indicator) Green |
Off: USB flash drive not insert or not detected by device |
|||
On: USB flash drive is detected by device |
||||
Blinking: the device is reading and writing the data from USB flash drive |
||||
ALM(Fault status indicator) Red |
Off: Device on normal working state |
On: Fault alarm |
||
1-24 (Copper ports indicators) Green |
Off: ports link down |
|||
On: ports link up |
||||
Blinking: data on TX/RX |
||||
1-24(PoE status indicators) Yellow |
Off: PoE not working |
|||
On: PoE working |
||||
17-28(Fiber ports indicators) Green |
Off: ports link down |
|||
On: ports link up |
||||
Blinking: data on TX/RX |
||||
Power parameter |
||||
Input voltage |
44-57VDC(802.3af) 52-57VDC(802.3at/802.3bt) redundant power input |
|||
Input current |
9A DCinput Max |
|||
Total power consumption |
Full loading without PoE≤ 36W PoE power budget ≤ 370W |
|||
Connector |
Removable 2*2-pin terminal block |
|||
Reverse polarity protection |
Support |
|||
Over-voltage protection |
Support |
|||
Over-current protection |
Support |
|||
Layer 2 functions |
||||
Port aggregation |
Support GE port aggregation Support 2.5GE aggregation Support 10GE aggregation Support static aggregation Support LACP dynamic aggregation Up to 64 aggregation groups and up to 8 ports per group |
|||
Port features |
Support IEEE802.3x flow control Support interface counters Support port isolation Port mirroring ( One-to-One,Many-to-One) Support loop detection(Port-based; VLAN-based) Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast) |
|||
Mac-address tablemanagement |
Support static Mac-address management Support dynamic Mac-address Management Support filtering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN |
|||
VLAN |
Support access mode Support trunk mode Support hybrid mode |
|||
VLANclassification |
Mac Based VLAN IP Based VLAN Protocol Based VLAN |
|||
GVRP |
Normal mode Fixed mode Forbidden mode |
|||
QinQ |
Port-based QinQ VLAN-based QinQ (VLAN-stacking; VLAN-mapping) Flow-based QinQ |
|||
LLDP |
LLDP (Link Layer Discovery Protocol) |
|||
Ring network protocol |
Support IEEE802.1D-STP Support IEEE802.1W-RSTP Support IEEE802.1S-MSTP |
|||
Support G.8032 ERPS protocol,single ring, sub Ring andmajor ring Recovery time ≤20ms |
||||
L2 Multicast |
||||
IGMP snooping |
Support IGMP snooping |
|||
Group address |
Support group address |
|||
Security functions |
||||
ACL |
IP Standard ACL MAC extend ACL IP extend ACL IPv6 ACL |
|||
QoS |
Support QoS Class,remarking Support SP, WRR queue scheduling Ingress port-based rate-limit Egress port-based rate-limit Support policy-based QoS |
|||
802.1x |
Port access control Mac-address access control RADIUS server |
|||
Port-security |
Port-security |
|||
IP source guard |
IP Port/MAC binding |
|||
ARP-check |
Support ARP-check and ARP packet filtering for illegal users |
|||
Access control |
Support Telnet/SSH/HTTP/HTTPS user access control |
|||
Management& Maintenance functions |
||||
User Management |
Support password protection Support userauthorization management |
|||
SNMP |
Supporting SNMP V1/V2C/V3 version |
|||
Web Management |
Web Management Support HTTP V1.1 Support HTTPS |
|||
CLI management |
Console/Telnet command line management |
|||
RMON |
Support RMON(Remote Monitoring) alarm |
|||
Firmware upgrade |
Firmware upgrade |
|||
Fault Detection |
Ping/Tracerout Dying gasp Support optical transceiver DDM function |
|||
Cable detection |
Support copper port cable detection |
|||
PoE management |
Support 802.3af/802.3at/802.3bt |
|||
Support PD watchdog |
||||
Support PoE priority management |
||||
Support Max PoE power configuration for each port |
||||
Support alarm waterline configuration |
||||
Support reserved power configuration |
||||
NTP |
Network Time Protocol |
|||
Syslog/Debug |
Syslog/Debug Syslog send to three servers |
|||
Configuration import/export |
Support FTP/TFTP remote import/export Support USB import/export |
|||
Dual partition management |
Support dual partition switching |
|||
Application Protocol Functions |
||||
DHCP Snooping |
DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82 |
|||
DHCP client |
Support DHCP client |
|||
Telnet server |
Support telnet server |
|||
Telnet client |
Support telnet client |
|||
SSH server |
Support SSH server |
|||
TACACS |
Support TACACS(the terminal access controller accesses the control system) |
|||
sflow |
Support network traffic analysis |
|||
TFTP |
Support TFTP Client |
|||
Layer 3 functions |
||||
ARP |
ARP table aging |
|||
DHCP server |
||||
IPv4 / IPv6 |
static routing |
|||
ECMP |
Support ECMP (Equal-cost multi-path routing) |
|||
Support the configuration of ECMP Max next-hop |
||||
Support capacity balanced configuration |
||||
Route policy |
IPv4 prefix-list |
|||
VRRP |
Virtual Router Redundancy Protocol |
|||
Routing Protocol Specification |
||||
RIP |
RIPv1/v2 |
|||
OSPFv2 |
OSPFv2 |
|||
BGP4 |
BGP4 |
|||
BGP Support Routing Recursive ECMP |
||||
Support to view the number of neighbors and up/down state |
||||
IS-IS |
IS-ISv4 |
|||
Routing entry |
13K |
|||
Switching features |
||||
Switching capacity |
128Gbps |
|||
Packet forwarding rate |
190.4Mpps |
|||
MAC address table |
16K |
|||
VLAN |
4K |
|||
Buffer |
12M bit |
|||
Forwarding delay |
<5us |
|||
Jumbo Frame |
Support 10Kbytes |
|||
MDX/MIDX |
Support |
|||
Watchdog |
Support |
|||
Mechanical structure |
||||
Case protection |
IP40 |
|||
Installation method |
Rack mountable |
|||
Dimension(W*D*H)mm |
440*45*280mm |
|||
Weight |
LT-IS6528XGP-4XS16GT8GC-U-2BT: 5.3kg; LT-IS6528XGP-4XS16GT8GC-U-D-2BT: 5.4kg |
|||
Operating environment |
||||
Operating temperature |
-40℃~+ 75℃ |
|||
Storage/transportation temperature |
-40℃~+ 85℃ |
|||
Relative humidity |
Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH |
|||
Industrial Standard |
||||
EMS |
Surge protection of power: IEC 61000-4-5 DC:6KV/6KV(8/20us) Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m EFT:IEC 61000-4-4 power 4K, signal 2K CS:IEC 61000-4-6 10V ESD:IEC 61000-4-2 Contact: 8K;Air: 15K |
|||
EMI |
FCC Part 15B Class A |
|||
Shock |
IEC 60068-2-27 |
|||
Free fall |
IEC 60068-2-32 |
|||
Vibration |
IEC 60068-2-6 |
|||
Certification |
CCC/CE/UKCA/RoHS/REACH/FCC |
|||
MTBF |
>200,000 hours |
|||
Warranty |
5 years |
Model |
Description |
LT-IS6528XGP-4XS16GT8GC-U-2BT |
Layer 3 managed rack-mount industrial PoE switch with 4*1G/2.5G/10GBase-X SFP+ ports,16*10/100/1000Base-T RJ45 PoE (1-2 ports support PoE++ 90W)and 8*Combo RJ45/SFP ports. Dual DC44-57V input; Operation temperature -40°C to 75°C |
LT-IS6528XGP-4XS16GT8GC-U-D-2BT |
Layer3 managed rack-mount industrial PoE switch with 4*1G/2.5G/10GBase-X SFP+ ports,16*10/100/1000Base-T RJ45 PoE (1-2 ports support PoE++ 90W)and 8*Combo RJ45/SFP ports. Dual DC44-57V input, Support DI/DO/RS485; Operation temperature -40°C to 75°C |