
|
Model No. |
LT-S8352XGP-4XS48GT |
||
|
Interface |
Fiber ports |
Copper RJ45 ports |
|
|
4 |
48 |
||
|
Ethernet |
48*10/100/1000Base-T RJ45 4*1G/2.5G/10GBase-X SFP+ |
||
|
Management port |
1*RJ45 Console port (115200,8,N,1) |
||
|
Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP
IEEE 802.3af |
||
|
LED Indicators |
|||
|
PWR (Power indicator) |
Off:the device is power off or failed |
On: the device power on is normal |
|
|
SYS(System status indicator) |
Blinking: device initialization |
On: device on normal operation |
|
|
1-48 (Copper ports indicators) Green |
Off: ports link down |
||
|
On: ports link up |
|||
|
Blinking: data on TX/RX |
|||
|
1-48 (PoE status indicators) Yellow |
Off: PoE not working |
||
|
On: PoE working |
|||
|
49-52(Fiber ports indicators) Green |
Off: ports link down |
||
|
On: ports link up |
|||
|
Blinking: data on TX/RX |
|||
|
Power parameter |
|||
|
Input voltage |
AC 100-240V |
||
|
Total power consumption |
Full loading ≤ 440W (850W optional) |
||
|
Over-current protection |
Support |
||
|
Layer 2 functions |
|||
|
Port aggregation |
Support GE port aggregation Support 2.5GE aggregation Support 10GE aggregation Support static aggregation Support LACP dynamic aggregation Up to 64 aggregation groups and up to 8 ports per group |
||
|
Port features |
Support IEEE802.3x flow control Support interface counters Support port isolation Port mirroring ( One-to-One,Many-to-One) Support loop detection(Port-based; VLAN-based) Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast) |
||
|
Mac-address table management |
Support static Mac-address management Support dynamic Mac-address Management Support filtering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN |
||
|
VLAN |
Support access mode Support trunk mode Support hybrid mode |
||
|
VLAN classification |
Mac Based VLAN IP Based VLAN Protocol Based VLAN |
||
|
GVRP |
Normal mode Fixed mode Forbidden mode |
||
|
QinQ |
Port-based QinQ VLAN-based QinQ (VLAN-stacking; VLAN-mapping) Flow-based QinQ |
||
|
LLDP |
LLDP (Link Layer Discovery Protocol) |
||
|
Ring network protocol |
Support IEEE802.1D-STP Support IEEE802.1W-RSTP Support IEEE802.1S-MSTP |
||
|
Support G.8032 ERPS protocol,single ring, sub Ring andmajor ring Recovery time ≤20ms |
|||
|
L2 Multicast |
|||
|
IGMP snooping |
Support IGMP snooping |
||
|
Group address |
Support group address |
||
|
Security functions |
|||
|
ACL |
IP Standard ACL MAC extend ACL IP extend ACL IPv6 ACL |
||
|
QoS |
Support QoS Class,remarking Support SP, WRR queue scheduling Ingress port-based rate-limit Egress port-based rate-limit Support policy-based QoS |
||
|
802.1x |
Port access control Mac-address access control RADIUS server |
||
|
Port-security |
Port-security |
||
|
IP source guard |
IP Port/MAC binding |
||
|
ARP-check |
Support ARP-check and ARP packet filtering for illegal users |
||
|
Access control |
Support Telnet/SSH/HTTP/HTTPS user access control |
||
|
Management& Maintenance functions |
|||
|
User Management |
Support password protection Support user authorization management |
||
|
SNMP |
Supporting SNMPV1/V2C/V3 version |
||
|
Web Management |
Web Management Support HTTP V1.1 Support HTTPS |
||
|
CLI management |
Console/Telnet command line management |
||
|
RMON |
Support RMON(Remote Monitoring) alarm |
||
|
Firmware upgrade |
Firmware upgrade |
||
|
Fault Detection |
Ping/Tracerout Support optical transceiver DDM function |
||
|
Cable detection |
Support copper port cable detection |
||
|
PoE management |
Support 802.3af/802.3at |
||
|
Support PD watchdog |
|||
|
Support PoE priority management |
|||
|
Support Max PoE power configuration for each port |
|||
|
Support alarm waterline configuration |
|||
|
Support reserved power configuration |
|||
|
NTP |
Network Time Protocol |
||
|
Syslog/Debug |
Syslog/Debug Syslog send to three servers |
||
|
Configuration import/export |
Support FTP/TFTP remote import/export |
||
|
Dual partition management |
Support dual partition switching |
||
|
Application Protocol Functions |
|||
|
DHCP Snooping |
DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82 |
||
|
DHCP client |
Support DHCP client |
||
|
Telnet server |
Support telnet server |
||
|
Telnet client |
Support telnet client |
||
|
SSH server |
Support SSH server |
||
|
TACACS |
Support TACACS(the terminal access controller accesses the control system) |
||
|
sflow |
Support network traffic analysis |
||
|
TFTP |
Support TFTP Client |
||
|
Layer 3 functions |
|||
|
ARP |
ARP table aging |
||
|
DHCP server |
|||
|
IPv4 / IPv6 |
static routing |
||
|
Switching features |
|||
|
Switching capacity |
336Gbps |
||
|
Packet forwarding rate |
499.9Mpps |
||
|
MAC address table |
16K |
||
|
VLAN |
4K |
||
|
Buffer |
12Mbit |
||
|
Forwarding delay |
<5us |
||
|
Jumbo Frame |
Support 10Kbytes |
||
|
MDX/MIDX |
Support |
||
|
Watchdog |
Support |
||
|
Mechanical structure |
|||
|
Installation method |
Desktop; Rack-mount |
||
|
Dimension(W*D*H)mm |
440*300*44mm |
||
|
Weight |
4.94kg |
||
|
Operating environment |
|||
|
Operating temperature |
-0℃~+50℃ |
||
|
Storage/transportation temperature |
-10℃~+70℃ |
||
|
Relative humidity |
Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH |
||
|
Certification |
CCC/CE/UKCA/RoHS/REACH/FCC |
||
|
MTBF |
>100,000 hours |
||
|
Model |
Description |
|
LT-S8352XGP-4XS48GT |
Layer 2+ managed PoE switch with 4*1G/2.5G/10G SFP+ slots + 48*10/100/1000 RJ45 PoE ports,AC 100-240V 50/60Hz, total power consumption 440W(850W optional) |